# packages

pkgId: 051f3f434bb02fab47f878d7eb08a5aec16d1ab8e3e3f74dccf5055fd0dddb16
name: nginx-debuginfo
arch: x86_64
version: 1.29.3
epoch: 2
release: 39.fc43.gps
summary: Debug information for package nginx
url: https://nginx.org/
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: 5ffacdff839a
rpm_sourcerpm: nginx-1.29.3-39.fc43.gps.src.rpm
location_href: RPMS/nginx-debuginfo-1.29.3-39.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: a67f1698e761ed974f2ac62bfe2906f2f93635b931ab729f4a3a458c981d5552
name: nginx-module-accept-language
arch: x86_64
version: 1.29.3+1.0.0
epoch: 2
release: 1.fc43.gps
summary: NGINX Accept-Language module
url: https://github.com/dvershinin/nginx_accept_language_module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-accept-language-1.29.3+1.0.0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-accept-language-1.29.3+1.0.0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX module which parses the Accept-Language header and gives the
  most suitable locale for the user from a list of supported locales
  from your website


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_accept_language_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 23830696ef98a58b847953c9d29ebb4d659547ac2b3b3c45384334e7ed9e8809
name: nginx-module-accept-language-debuginfo
arch: x86_64
version: 1.29.3+1.0.0
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-accept-language
url: https://github.com/dvershinin/nginx_accept_language_module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-accept-language-1.29.3+1.0.0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-accept-language-debuginfo-1.29.3+1.0.0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-accept-language.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 133099658404ca4f8acae09d35a44ab4eb905d954b8ee224a570d9c0b33f1133
name: nginx-module-acme
arch: x86_64
version: 1.29.3+0.3.0
epoch: 2
release: 1.fc43.gps
summary: Automatic certificate management (ACMEv2) module for NGINX
url: https://github.com/nginx/nginx-acme
rpm_license: ASL 2.0
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: 2cf493f1c0ea
rpm_sourcerpm: nginx-module-acme-1.29.3+0.3.0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-acme-1.29.3+0.3.0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  An NGINX module with the implementation of the automatic certificate
  management (ACMEv2) protocol.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_acme_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 63ecb1f3c26cafcbce315b9b52ae30d246609b6d23e30ce0f51299b975851053
name: nginx-module-acme-debuginfo
arch: x86_64
version: 1.29.3+0.3.0
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-acme
url: https://github.com/nginx/nginx-acme
rpm_license: ASL 2.0
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: 2cf493f1c0ea
rpm_sourcerpm: nginx-module-acme-1.29.3+0.3.0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-acme-debuginfo-1.29.3+0.3.0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-acme.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 164cec21bf2242a394e537703d290512f821de84812ef017feead15e5c75611f
name: nginx-module-ajp
arch: x86_64
version: 1.29.3+0.3.3
epoch: 2
release: 1.fc43.gps
summary: Support AJP protocol proxy with NGINX
url: https://github.com/dvershinin/nginx_ajp_module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-ajp-1.29.3+0.3.3-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-ajp-1.29.3+0.3.3-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  With this module, Nginx can connect to AJP port directly.
  The motivation of writing these modules is Nginx's high performance
  and robustness.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_ajp_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: f3c6dca1facf5e14cdd8b493b2cb806d6ddba3ff366d85966ff047dfbb1c7f92
name: nginx-module-ajp-debuginfo
arch: x86_64
version: 1.29.3+0.3.3
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-ajp
url: https://github.com/dvershinin/nginx_ajp_module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-ajp-1.29.3+0.3.3-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-ajp-debuginfo-1.29.3+0.3.3-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-ajp.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: c806bae15864c3ff9dd93ceb96ec460cbbce379af234debab6560546c0cb19e9
name: nginx-module-array-var
arch: x86_64
version: 1.29.3+0.6+0.3.4
epoch: 2
release: 1.fc43.gps
summary: Array-typed variables for NGINX
url: https://github.com/openresty/array-var-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-array-var-1.29.3+0.6+0.3.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-array-var-1.29.3+0.6+0.3.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  Adds support for array-typed variables to NGINX config files.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ndk_http_module.so;
      load_module modules/ngx_http_array_var_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: af127974179e80964f1017707f287398914b900d3677c87d12c3cd7becf09adb
name: nginx-module-array-var-debuginfo
arch: x86_64
version: 1.29.3+0.6+0.3.4
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-array-var
url: https://github.com/openresty/array-var-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-array-var-1.29.3+0.6+0.3.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-array-var-debuginfo-1.29.3+0.6+0.3.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-array-var.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 97754a968e1619a7070c54d4eeb0adb34069b68e37f7eee9ff908ac51ae0852b
name: nginx-module-auth-digest
arch: x86_64
version: 1.29.3+1.0.0
epoch: 2
release: 1.fc43.gps
summary: Digest Authentication for NGINX
url: https://github.com/atomx/nginx-http-auth-digest
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-auth-digest-1.29.3+1.0.0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-auth-digest-1.29.3+1.0.0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  Digest Authentication for NGINX.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_auth_digest_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: a0522da539560eb574ce0facf253d4718d365b1439bbc3ce49040322f7af62a8
name: nginx-module-auth-digest-debuginfo
arch: x86_64
version: 1.29.3+1.0.0
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-auth-digest
url: https://github.com/atomx/nginx-http-auth-digest
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-auth-digest-1.29.3+1.0.0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-auth-digest-debuginfo-1.29.3+1.0.0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-auth-digest.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: e1e683c6e8f8e95061ff27f73498d793de4048cd18d8803a005d99b764812605
name: nginx-module-auth-ldap
arch: x86_64
version: 1.29.3+0.3
epoch: 2
release: 1.fc43.gps
summary: LDAP Authentication module for NGINX
url: https://github.com/dvershinin/nginx-auth-ldap
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-auth-ldap-1.29.3+0.3-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-auth-ldap-1.29.3+0.3-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  LDAP module for nginx which supports authentication against
  multiple LDAP servers

  For any issues, see bug tracker at
  https://github.com/kvspb/nginx-auth-ldap/issues
  and reference commit 83c059b73566c2ee9cbda920d91b66657cf120b7
  if requested, not the version of the package.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_auth_ldap_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: d85f5426fbce1002c1add58994eee55b403123c15319668a46ddb32eb5072fc7
name: nginx-module-auth-ldap-debuginfo
arch: x86_64
version: 1.29.3+0.3
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-auth-ldap
url: https://github.com/dvershinin/nginx-auth-ldap
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-auth-ldap-1.29.3+0.3-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-auth-ldap-debuginfo-1.29.3+0.3-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-auth-ldap.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 7449db9ea1b74f7938d523335aca4b93c040d2aaebe51175cd0b0b0fae3918e5
name: nginx-module-auth-pam
arch: x86_64
version: 1.29.3+1.5.5
epoch: 2
release: 1.fc43.gps
summary: PAM authentication dynamic module for NGINX
url: https://github.com/sto/ngx_http_auth_pam_module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-auth-pam-1.29.3+1.5.5-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-auth-pam-1.29.3+1.5.5-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX module to use PAM for simple HTTP authentication


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_auth_pam_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 5d485a5c359b867134b29093191711eb24a391f8b21297ed4cba8c49dad0f9c9
name: nginx-module-auth-pam-debuginfo
arch: x86_64
version: 1.29.3+1.5.5
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-auth-pam
url: https://github.com/sto/ngx_http_auth_pam_module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-auth-pam-1.29.3+1.5.5-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-auth-pam-debuginfo-1.29.3+1.5.5-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-auth-pam.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 88a27f5d3bedbd1af1abf774de866c3d0123047450d91efcd64ed7eedf92311d
name: nginx-module-auth-totp
arch: x86_64
version: 1.29.3+1.1.0
epoch: 2
release: 1.fc43.gps
summary: Time-based one-time password (TOTP) authentication for NGINX
url: https://github.com/61131/nginx-http-auth-totp
rpm_license: MIT
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-auth-totp-1.29.3+1.1.0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-auth-totp-1.29.3+1.1.0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  The Time-based One-Time Password (TOTP) algorithm, provides a secure mechanism
  for short-lived one-time password values, which are desirable for enhanced
  security.

  This algorithm can be used across a wide range of network applications ranging
  from remote Virtual Private Network (VPN) access, Wi-Fi network logon to
  transaction-orientated Web applications.

  This module provides TOTP authentication for a NGINX server.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_auth_totp_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: b161afce31852e63cbf5b67d2186ce611ebed4ec045b3475d32a1715918e754d
name: nginx-module-auth-totp-debuginfo
arch: x86_64
version: 1.29.3+1.1.0
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-auth-totp
url: https://github.com/61131/nginx-http-auth-totp
rpm_license: MIT
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-auth-totp-1.29.3+1.1.0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-auth-totp-debuginfo-1.29.3+1.1.0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-auth-totp.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 9fbf575ae8f497d2d5f5358e21e87cbaefebee4b0861bf73e872cdeea0367b85
name: nginx-module-aws-auth
arch: x86_64
version: 1.29.3+2.1.1
epoch: 2
release: 1.fc43.gps
summary: NGINX module to proxy to authenticated AWS services
url: https://github.com/anomalizer/ngx_aws_auth
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-aws-auth-1.29.3+2.1.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-aws-auth-1.29.3+2.1.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This NGINX module can proxy requests to authenticated S3 backends
  using Amazon's V4 authentication API.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_aws_auth_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 579c7024bf8ee49dbe1c5dc19d391d41f6621da34a23b74a9f10c3880a9b98a4
name: nginx-module-aws-auth-debuginfo
arch: x86_64
version: 1.29.3+2.1.1
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-aws-auth
url: https://github.com/anomalizer/ngx_aws_auth
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-aws-auth-1.29.3+2.1.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-aws-auth-debuginfo-1.29.3+2.1.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-aws-auth.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: ad9bf2a93661d57867859e9b203292b9b8ab9f7f094d2620b2baf3334e286d19
name: nginx-module-bot-verifier
arch: x86_64
version: 1.29.3+0.0.11
epoch: 2
release: 1.fc43.gps
summary: A search index bot verification module for NGINX
url: https://github.com/dvershinin/ngx_bot_verifier
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-bot-verifier-1.29.3+0.0.11-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-bot-verifier-1.29.3+0.0.11-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  [BETA] This module has been tested on a handful of production
  websites.

  This is an NGINX module designed to validate actors claiming to be
  search engine indexers. It is right to disable security mechanisms
  for valid search engine bots to ensure your controls do not interfere
  with page rankings on any of the search providers. The issue is
  that the User Agent header cannot be trusted. In order to ensure you
  are allowing only valid search engine indexers, you must validate
  according to their published standards.

  This module performs that validation and caches the results to ensure
  you do not pay validation penalties on every request.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_bot_verifier_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 9defff322d75220385d1b5c6ff7f88fbba2702dd8305bcb20e4950a2fe72958c
name: nginx-module-bot-verifier-debuginfo
arch: x86_64
version: 1.29.3+0.0.11
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-bot-verifier
url: https://github.com/dvershinin/ngx_bot_verifier
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-bot-verifier-1.29.3+0.0.11-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-bot-verifier-debuginfo-1.29.3+0.0.11-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-bot-verifier.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 6d66a883e573dd9482c12e592291cfed19b0d7fd6d4d05b36b70266927ed40c2
name: nginx-module-brotli-debuginfo
arch: x86_64
version: 1.29.4+0.1.4
epoch: 0
release: 3.fc43.gps
summary: Debug information for package nginx-module-brotli
url: https://github.com/GetPageSpeed/ngx_brotli
rpm_license: BSD
rpm_vendor: GetPageSpeed, Inc.
rpm_group: Development/Debug
rpm_buildhost: 39ad7e32674c
rpm_sourcerpm: nginx-module-brotli-1.29.4+0.1.4-3.fc43.gps.src.rpm
location_href: RPMS/nginx-module-brotli-debuginfo-1.29.4+0.1.4-3.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-brotli.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 3b115a3f3aeebfb31be5b33142c97cd5f7fa73ceea868d52a930753dd85676b5
name: nginx-module-cache-purge
arch: x86_64
version: 1.29.3+2.5.4
epoch: 2
release: 1.fc43.gps
summary: NGINX Cache Purge module
url: https://github.com/nginx-modules/ngx_cache_purge
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-cache-purge-1.29.3+2.5.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-cache-purge-1.29.3+2.5.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX module which adds ability to purge content from FastCGI, proxy,
  SCGI and uWSGI caches. A purge operation removes the content with
  the same cache key as the purge request has.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_cache_purge_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 6c9e683cd703bacd925248d613591351347b04769415b73267b76bd64990ccae
name: nginx-module-cache-purge-debuginfo
arch: x86_64
version: 1.29.3+2.5.4
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-cache-purge
url: https://github.com/nginx-modules/ngx_cache_purge
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-cache-purge-1.29.3+2.5.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-cache-purge-debuginfo-1.29.3+2.5.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-cache-purge.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 75ffe8e3dc98f04b27003de8886014aedd37ed2e13e891702f58174c0ccac9e9
name: nginx-module-captcha
arch: x86_64
version: 1.29.3+0.0.1
epoch: 2
release: 1.fc43.gps
summary: NGINX Captcha Module
url: https://github.com/RekGRpth/ngx_http_captcha_module
rpm_license: MIT
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-captcha-1.29.3+0.0.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-captcha-1.29.3+0.0.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX module for generate captcha and validate captcha code


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_captcha_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 50f2f41c96fb44a5857e0c43e37ec21cc8bd04625b344743cd56ec1139b99492
name: nginx-module-captcha-debuginfo
arch: x86_64
version: 1.29.3+0.0.1
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-captcha
url: https://github.com/RekGRpth/ngx_http_captcha_module
rpm_license: MIT
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-captcha-1.29.3+0.0.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-captcha-debuginfo-1.29.3+0.0.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-captcha.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 6b37beca69cd3971e703e5d0e07731c0a6b62678dba52bc5155cadf287ccfcda
name: nginx-module-cgi
arch: x86_64
version: 1.29.3+0.14.1
epoch: 2
release: 1.fc43.gps
summary: CGI support for NGINX
url: https://github.com/pjincz/nginx-cgi
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-cgi-1.29.3+0.14.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-cgi-1.29.3+0.14.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  CGI support for NGINX


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_cgi_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 1e4a87c5f3b9c7bb573dc0c1e4f906be293d753bb5a0e8935a8f1a8927b145a9
name: nginx-module-cgi-debuginfo
arch: x86_64
version: 1.29.3+0.14.1
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-cgi
url: https://github.com/pjincz/nginx-cgi
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-cgi-1.29.3+0.14.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-cgi-debuginfo-1.29.3+0.14.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-cgi.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: a13e21f440220554c41fb7cea6947b75eb666318b1c0dfcae4557dd51d4b534d
name: nginx-module-combined-upstreams
arch: x86_64
version: 1.29.3+2.3.1
epoch: 2
release: 1.fc43.gps
summary: NGINX Combined Upstreams module
url: https://github.com/lyokha/nginx-combined-upstreams-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-combined-upstreams-1.29.3+2.3.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-combined-upstreams-1.29.3+2.3.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  The module introduces three directives add_upstream,
  combine_server_singlets, and extend_single_peers available inside
  upstream configuration blocks, and a new configuration block
  upstrand for building super-layers of upstreams. Additionally,
  directive dynamic_upstrand is introduced for choosing upstrands
  in run-time.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_combined_upstreams_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 13e8d90952c06a7bf6b288bd9c2ec933adfc9f560c23385e011c574683b39e70
name: nginx-module-combined-upstreams-debuginfo
arch: x86_64
version: 1.29.3+2.3.1
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-combined-upstreams
url: https://github.com/lyokha/nginx-combined-upstreams-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-combined-upstreams-1.29.3+2.3.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-combined-upstreams-debuginfo-1.29.3+2.3.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-combined-upstreams.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 6777596d475a31b7435f49fe20b57e5a48f7671b03e32421b33e252e198bc318
name: nginx-module-concat
arch: x86_64
version: 1.29.3+1.2.3
epoch: 2
release: 1.fc43.gps
summary: HTTP Concatenation module for NGINX
url: https://github.com/dvershinin/nginx-http-concat
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-concat-1.29.3+1.2.3-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-concat-1.29.3+1.2.3-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX module for concatenating files in a given context: CSS and JS files
  usually


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_concat_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 1176d575982ccc81fa10812046b00b156cc5a189586926728164f8ee16a1c631
name: nginx-module-concat-debuginfo
arch: x86_64
version: 1.29.3+1.2.3
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-concat
url: https://github.com/dvershinin/nginx-http-concat
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-concat-1.29.3+1.2.3-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-concat-debuginfo-1.29.3+1.2.3-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-concat.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 89e7bb9a872ab8a5c50b8487da1cfd4d4104dc643ea5a08e805dc13a6771718f
name: nginx-module-cookie-flag
arch: x86_64
version: 1.29.3+1.1.0
epoch: 2
release: 1.fc43.gps
summary: NGINX cookie flag module
url: https://github.com/AirisX/nginx_cookie_flag_module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-cookie-flag-1.29.3+1.1.0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-cookie-flag-1.29.3+1.1.0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This NGINX module allows to set the flags "HttpOnly", "secure"
  and "SameSite" for cookies in the "Set-Cookie" upstream response
  headers.

  The register of letters for the flags doesn't matter as it will be
  converted to the correct value. The order of cookie declaration
  among multiple directives doesn't matter too. It is possible to set
  a default value using symbol "*". In this case flags will be added
  to the all cookies if no other value for them is overriden.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_cookie_flag_filter_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 76b8cbff7a9a140b1134bfb93962c2a228e05d35abcae2562ff075d165213487
name: nginx-module-cookie-flag-debuginfo
arch: x86_64
version: 1.29.3+1.1.0
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-cookie-flag
url: https://github.com/AirisX/nginx_cookie_flag_module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-cookie-flag-1.29.3+1.1.0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-cookie-flag-debuginfo-1.29.3+1.1.0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-cookie-flag.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 342c9d16035d7c9d34b1f6e61e10b057270b8925d82033f3afdce985318cd490
name: nginx-module-cookie-limit
arch: x86_64
version: 1.29.3+1.2
epoch: 2
release: 1.fc43.gps
summary: NGINX module to limit the number of malicious ip forged cookies
url: https://github.com/limithit/ngx_cookie_limit_req_module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-cookie-limit-1.29.3+1.2-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-cookie-limit-1.29.3+1.2-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  The ngx_cookie_limit_req_module module not only limits the access
  rate of cookies but also limits the number of malicious ip
  forged cookies.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_cookie_limit_req_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 6f6b6998cfa367c284bf92b68f2fe3bceac6324e4f8a3e8a0b0cda88eb0fbe02
name: nginx-module-cookie-limit-debuginfo
arch: x86_64
version: 1.29.3+1.2
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-cookie-limit
url: https://github.com/limithit/ngx_cookie_limit_req_module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-cookie-limit-1.29.3+1.2-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-cookie-limit-debuginfo-1.29.3+1.2-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-cookie-limit.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: cfa0afd390fb0d4fa7c9219a630fa6de8c1b31369013804205f6a6ae089416f9
name: nginx-module-coolkit
arch: x86_64
version: 1.29.3+0.2
epoch: 2
release: 1.fc43.gps
summary: NGINX CoolKit Module
url: https://github.com/dvershinin/ngx_coolkit
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-coolkit-1.29.3+0.2-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-coolkit-1.29.3+0.2-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX CoolKit is collection of small and useful NGINX add-ons.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_coolkit_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 20284cf3e43159f35e68ac023e775907a3486499146a91fb756bf8866457dbf6
name: nginx-module-coolkit-debuginfo
arch: x86_64
version: 1.29.3+0.2
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-coolkit
url: https://github.com/dvershinin/ngx_coolkit
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-coolkit-1.29.3+0.2-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-coolkit-debuginfo-1.29.3+0.2-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-coolkit.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 42300b50d764bf5f7c99a191a57fff38f40527cc023a9ee4953753fa726190df
name: nginx-module-dav-ext
arch: x86_64
version: 1.29.3+3.0.0
epoch: 2
release: 1.fc43.gps
summary: NGINX WebDAV PROPFIND,OPTIONS,LOCK,UNLOCK support
url: https://github.com/arut/nginx-dav-ext-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-dav-ext-1.29.3+3.0.0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-dav-ext-1.29.3+3.0.0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  For full WebDAV support in nginx you need to use the standard
  ngx_http_dav_module as well as this module for the missing methods.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_dav_ext_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 4bec8f626712c8d0ec73db515e59ad50928a473d1f00134b7520db2963c49abc
name: nginx-module-dav-ext-debuginfo
arch: x86_64
version: 1.29.3+3.0.0
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-dav-ext
url: https://github.com/arut/nginx-dav-ext-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-dav-ext-1.29.3+3.0.0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-dav-ext-debuginfo-1.29.3+3.0.0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-dav-ext.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 03c600ca56efdeab149946303953ce1abb8587ec733f970bf9262cf5e5798a49
name: nginx-module-doh
arch: x86_64
version: 1.29.3+0.1
epoch: 2
release: 1.fc43.gps
summary: NGINX module for serving DNS-over-HTTPS (DOH) requests
url: https://github.com/dvershinin/Nginx-DOH-Module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-doh-1.29.3+0.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-doh-1.29.3+0.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  Simple NGINX module for serving DNS-over-HTTPS (DOH) requests.

  CAVEAT EMPTOR: This module is experimental, even though I have been using it
  successfully with both Firefox and Curl, there may be undiscovered bugs.
  Zone transfer is currently not officially supported.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_doh_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 5745cafb4d41b6095aa195cc95e084df9b8d789c48772ae6ba5c616cfd28dce1
name: nginx-module-doh-debuginfo
arch: x86_64
version: 1.29.3+0.1
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-doh
url: https://github.com/dvershinin/Nginx-DOH-Module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-doh-1.29.3+0.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-doh-debuginfo-1.29.3+0.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-doh.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: e46e48ce8b543507a2deb1ca7aa5e64b77a2e20890cde6de1a0f5def577d3e0a
name: nginx-module-dynamic-etag
arch: x86_64
version: 1.29.3+0.2.3
epoch: 2
release: 1.fc43.gps
summary: NGINX module for adding ETag to dynamic content
url: https://github.com/dvershinin/ngx_dynamic_etag
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-dynamic-etag-1.29.3+0.2.3-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-dynamic-etag-1.29.3+0.2.3-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This NGINX module empowers your dynamic content with automatic ETag
  header. It allows client browsers to issue conditional GET requests
  to dynamic pages.

  This saves bandwidth and ensures better performance!


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_dynamic_etag_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 8b549d545faaf5d95cc4fb836e7d505ef3376640544dd14c396a199191261755
name: nginx-module-dynamic-etag-debuginfo
arch: x86_64
version: 1.29.3+0.2.3
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-dynamic-etag
url: https://github.com/dvershinin/ngx_dynamic_etag
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-dynamic-etag-1.29.3+0.2.3-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-dynamic-etag-debuginfo-1.29.3+0.2.3-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-dynamic-etag.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: ea6a9c6bfbc0dacbca56947de7c7cfeb6173493b9540741cf01a18953562d4db
name: nginx-module-dynamic-limit-req
arch: x86_64
version: 1.29.3+1.9.3
epoch: 2
release: 1.fc43.gps
summary: NGINX module to dynamically lock IP and release it periodically
url: https://github.com/limithit/ngx_dynamic_limit_req_module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-dynamic-limit-req-1.29.3+1.9.3-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-dynamic-limit-req-1.29.3+1.9.3-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX module to dynamically lock IP and release it periodically.

  This module is an extension based on ngx_http_limit_req_module.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_dynamic_limit_req_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 4febc76f120bb6e27a4319b7457d9af8c1de37eaeb36f0026d84e2e6f2698b81
name: nginx-module-dynamic-limit-req-debuginfo
arch: x86_64
version: 1.29.3+1.9.3
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-dynamic-limit-req
url: https://github.com/limithit/ngx_dynamic_limit_req_module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-dynamic-limit-req-1.29.3+1.9.3-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-dynamic-limit-req-debuginfo-1.29.3+1.9.3-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-dynamic-limit-req.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: d95efbe6e99ecc41a4674805526ae602093547d3f268a5d5127b04e5c6d7cd5d
name: nginx-module-echo
arch: x86_64
version: 1.29.3+0.64
epoch: 2
release: 1.fc43.gps
summary: nginx Echo module
url: https://github.com/openresty/echo-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-echo-1.29.3+0.64-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-echo-1.29.3+0.64-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  An NGINX module for bringing the power of "echo", "sleep", "time"
  and more to NGINX's config file


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_echo_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: c5d7057788d46f2e941fa090bc169a479df119e72c68ee96c79d2272a3a6d322
name: nginx-module-echo-debuginfo
arch: x86_64
version: 1.29.3+0.64
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-echo
url: https://github.com/openresty/echo-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-echo-1.29.3+0.64-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-echo-debuginfo-1.29.3+0.64-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-echo.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: f904497b7122836b63964bfc8b09d5d56713613fee0c50f34135290ae81e290d
name: nginx-module-encrypted-session
arch: x86_64
version: 1.29.3+0.9+0.3.4
epoch: 2
release: 1.fc43.gps
summary: Encrypt and decrypt NGINX variable values
url: https://github.com/openresty/encrypted-session-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-encrypted-session-1.29.3+0.9+0.3.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-encrypted-session-1.29.3+0.9+0.3.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX module to encrypt and decrypt NGINX variable values.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ndk_http_module.so;
      load_module modules/ngx_http_encrypted_session_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 906fc0dff02f078c25329184191640b7e8a87fdcbbaab62b35aff11e67581edd
name: nginx-module-encrypted-session-debuginfo
arch: x86_64
version: 1.29.3+0.9+0.3.4
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-encrypted-session
url: https://github.com/openresty/encrypted-session-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-encrypted-session-1.29.3+0.9+0.3.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-encrypted-session-debuginfo-1.29.3+0.9+0.3.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-encrypted-session.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 1a2ada245e3af0fca7c537c40ba0c732dc1bcef80fb6eddc8ef306ddfa522730
name: nginx-module-execute
arch: x86_64
version: 1.29.3+1.6.1
epoch: 2
release: 1.fc43.gps
summary: NGINX Execute module
url: https://github.com/limithit/NginxExecute
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-execute-1.29.3+1.6.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-execute-1.29.3+1.6.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  The NginxExecute module executes the shell command through GET and
  POST to display the result.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_execute_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 6230fa0ba340fd9208d60feb76bed57c44fbf06261aacfa1dc00d71f16e3556b
name: nginx-module-execute-debuginfo
arch: x86_64
version: 1.29.3+1.6.1
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-execute
url: https://github.com/limithit/NginxExecute
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-execute-1.29.3+1.6.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-execute-debuginfo-1.29.3+1.6.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-execute.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: cab50b6f472940956b36ce34b645f106fd841cc201feeb5fdeafb7349a4c3060
name: nginx-module-f4fhds
arch: x86_64
version: 1.29.3+0.0.1
epoch: 2
release: 1.fc43.gps
summary: NGINX module for Adobe f4f format
url: https://github.com/GetPageSpeed/f4fhds
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-f4fhds-1.29.3+0.0.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-f4fhds-1.29.3+0.0.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This module implements handling of HTTP Dynamic Streaming requests
  in the "/videoSeg1-Frag1" form — extracting the needed fragment
  from the videoSeg1.f4f file using the videoSeg1.f4x index file.
  This module is an alternative to the Adobe’s f4f module
  (HTTP Origin Module) for Apache.

  It is open-source equivalent for commercial ngx_http_f4f_module
  module.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_f4fhds_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: dd1d44f619fccd8cb8f9e5115317b6cd2d7da889f2ba72c6c1ca334e8198b4f2
name: nginx-module-f4fhds-debuginfo
arch: x86_64
version: 1.29.3+0.0.1
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-f4fhds
url: https://github.com/GetPageSpeed/f4fhds
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-f4fhds-1.29.3+0.0.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-f4fhds-debuginfo-1.29.3+0.0.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-f4fhds.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 5ee1ae8562551db4323325b5400c4c6063ef291964fe713e7cc0140dc50b7dca
name: nginx-module-fancyindex
arch: x86_64
version: 1.29.3+0.5.2
epoch: 2
release: 1.fc43.gps
summary: NGINX Fancy Index module
url: https://github.com/aperezdc/ngx-fancyindex
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-fancyindex-1.29.3+0.5.2-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-fancyindex-1.29.3+0.5.2-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  The Fancy Index module makes possible the generation of file
  listings, like the built-in autoindex module does, but adding
  a touch of style.
  This is possible because the module allows a certain degree
  of customization of the generated content:

    * Custom headers, either local or stored remotely.
    * Custom footers, either local or stored remotely.
    * Add your own CSS style rules.
    * Allow choosing to sort elements by name (default),
      modification time, or size; both ascending (default),
      or descending.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_fancyindex_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: a0f96c4b3a1e5e9f3ec3dd3389d7ba0cad63c848fba8bd964562a44002f34370
name: nginx-module-fancyindex-debuginfo
arch: x86_64
version: 1.29.3+0.5.2
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-fancyindex
url: https://github.com/aperezdc/ngx-fancyindex
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-fancyindex-1.29.3+0.5.2-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-fancyindex-debuginfo-1.29.3+0.5.2-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-fancyindex.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 50f5f639ea3343904988d355bfd42898076ffd173342b0092eb0f757e671a55b
name: nginx-module-flv
arch: x86_64
version: 1.29.3+1.2.12
epoch: 2
release: 2.fc43.gps
summary: Media streaming server based on nginx-module-rtmp
url: https://github.com/winshining/nginx-http-flv-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-flv-1.29.3+1.2.12-2.fc43.gps.src.rpm
location_href: RPMS/nginx-module-flv-1.29.3+1.2.12-2.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  Media streaming server based on nginx-module-rtmp.
  In addition to the features nginx-rtmp-module provides,
  HTTP-FLV, GOP cache and VHOST (one IP for multi domain names)
  are supported now.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_flv_live_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 99467e4cb08bf421f12f9bdf69c54042e0d752cc87d8b9f9397bb45f4313699b
name: nginx-module-flv-debuginfo
arch: x86_64
version: 1.29.3+1.2.12
epoch: 2
release: 2.fc43.gps
summary: Debug information for package nginx-module-flv
url: https://github.com/winshining/nginx-http-flv-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-flv-1.29.3+1.2.12-2.fc43.gps.src.rpm
location_href: RPMS/nginx-module-flv-debuginfo-1.29.3+1.2.12-2.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-flv.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 9facf80acfb855058a7c785d990fceac6eade20ae8a81842534ccfde8782c574
name: nginx-module-form-input
arch: x86_64
version: 1.29.3+0.12+0.3.4
epoch: 2
release: 1.fc43.gps
summary: NGINX form input module
url: https://github.com/calio/form-input-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-form-input-1.29.3+0.12+0.3.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-form-input-1.29.3+0.12+0.3.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX module that reads HTTP POST and PUT request body encoded in
  "application/x-www-form-urlencoded" and parses the arguments into
  NGINX variables.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ndk_http_module.so;
      load_module modules/ngx_http_form_input_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 57713960031cf6390105a525e58e4a5520aa7622e07a7731b4c689b0958388cb
name: nginx-module-form-input-debuginfo
arch: x86_64
version: 1.29.3+0.12+0.3.4
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-form-input
url: https://github.com/calio/form-input-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-form-input-1.29.3+0.12+0.3.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-form-input-debuginfo-1.29.3+0.12+0.3.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-form-input.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: e652425a31e59edad57e9f4212d03f6addd4510123e1c7566fd3d5ddd0491167
name: nginx-module-geoip
arch: x86_64
version: 1.29.3
epoch: 2
release: 1.fc43.gps
summary: NGINX GeoIP dynamic modules
url: http://nginx.org/
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-geoip-1.29.3-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-geoip-1.29.3-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX GeoIP dynamic modules.
  Uses legacy GeoIP data format, discouraged from use in favor of nginx-module-geoip2


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_geoip_module.so;
      load_module modules/ngx_stream_geoip_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 59d3011a9897de21c879e30dea6a493bc6d7a9cc3a32a1d30336a66ff5ee035b
name: nginx-module-geoip-debuginfo
arch: x86_64
version: 1.29.3
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-geoip
url: http://nginx.org/
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-geoip-1.29.3-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-geoip-debuginfo-1.29.3-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-geoip.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 2e1f14938c31eba7246d4ade97a821adce5aea155c4bd3ab1c492328c92345aa
name: nginx-module-geoip2
arch: x86_64
version: 1.29.3+3.4
epoch: 2
release: 1.fc43.gps
summary: NGINX GeoIP2 module
url: https://github.com/leev/ngx_http_geoip2_module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-geoip2-1.29.3+3.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-geoip2-1.29.3+3.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX module which creates variables with values from the MaxMind
  geoip2 databases. based on the client IP (default) or from a
  specific variable (supports both IPv4 and IPv6)


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_geoip2_module.so;
      load_module modules/ngx_stream_geoip2_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 95fe5e6d02b4bff33cdbf78361dfa73b6a666c98d2753bcc72140d7eebc471ed
name: nginx-module-geoip2-debuginfo
arch: x86_64
version: 1.29.3+3.4
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-geoip2
url: https://github.com/leev/ngx_http_geoip2_module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-geoip2-1.29.3+3.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-geoip2-debuginfo-1.29.3+3.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-geoip2.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: c9b2519ad99689d3881cd3016cd67ae33acd7181d6a6f644cfd1cf86a2cbd064
name: nginx-module-google
arch: x86_64
version: 1.29.3+0.2.4
epoch: 2
release: 1.fc43.gps
summary: NGINX Module for Google Mirror creation
url: https://github.com/GetPageSpeed/ngx_http_google_filter_module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-google-1.29.3+0.2.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-google-1.29.3+0.2.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX module which makes google mirror much easier to deploy


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_google_filter_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 8e8a2db51e945f5c750a28bd53f3bdfa2409ea7fae79f0776f6945ad19300410
name: nginx-module-google-debuginfo
arch: x86_64
version: 1.29.3+0.2.4
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-google
url: https://github.com/GetPageSpeed/ngx_http_google_filter_module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-google-1.29.3+0.2.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-google-debuginfo-1.29.3+0.2.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-google.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: d6463f893b0709eaacafde8171b0281d75bc5271e533e125be3cfeb554e5e6cc
name: nginx-module-graphite
arch: x86_64
version: 1.29.3+4.3
epoch: 2
release: 1.fc43.gps
summary: An NGINX module for collecting stats into Graphite
url: https://github.com/mailru/graphite-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-graphite-1.29.3+4.3-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-graphite-1.29.3+4.3-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX module for collecting location stats into Graphite.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_graphite_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 36f0bd81b418f498234f685738cee9a1b2d3aae811cd26ba973250a89ff45af6
name: nginx-module-graphite-debuginfo
arch: x86_64
version: 1.29.3+4.3
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-graphite
url: https://github.com/mailru/graphite-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-graphite-1.29.3+4.3-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-graphite-debuginfo-1.29.3+4.3-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-graphite.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 13e22e09e45feb3f4db2c3b87e686627bf8cd21b6df1f14c138dd33c0fdac832
name: nginx-module-headers-more
arch: x86_64
version: 1.29.3+0.33
epoch: 2
release: 1.fc43.gps
summary: NGINX Headers More dynamic module
url: https://github.com/dvershinin/headers-more-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-headers-more-1.29.3+0.33-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-headers-more-1.29.3+0.33-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  Set, add, and clear arbitrary output headers in the NGINX HTTP servers.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_headers_more_filter_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 1ee748147a56d6ee8f95d2771ddea27a9ea15eecd8278ff292018c68e88d38af
name: nginx-module-headers-more-debuginfo
arch: x86_64
version: 1.29.3+0.33
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-headers-more
url: https://github.com/dvershinin/headers-more-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-headers-more-1.29.3+0.33-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-headers-more-debuginfo-1.29.3+0.33-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-headers-more.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 9d1e9fd5a68d11adac72dbcdff245b20e6134e20faa64d123640d69f2baf6310
name: nginx-module-hmac-secure-link
arch: x86_64
version: 1.29.3+0.3
epoch: 2
release: 1.fc43.gps
summary: Alternative NGINX HMAC Secure Link module with support for OpenSSL hashes
url: https://github.com/nginx-modules/ngx_http_hmac_secure_link_module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-hmac-secure-link-1.29.3+0.3-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-hmac-secure-link-1.29.3+0.3-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  Alternative NGINX HMAC Secure Link module with support for OpenSSL
  hashes


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_hmac_secure_link_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: d5dca06be2b3679dbcd0783a775d9bae545dd5ff3304f96c143ef847431e7e5e
name: nginx-module-hmac-secure-link-debuginfo
arch: x86_64
version: 1.29.3+0.3
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-hmac-secure-link
url: https://github.com/nginx-modules/ngx_http_hmac_secure_link_module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-hmac-secure-link-1.29.3+0.3-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-hmac-secure-link-debuginfo-1.29.3+0.3-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-hmac-secure-link.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: cb45e1f7987230100b704193b4e047da689d1cb8b084aa7944b0bcb2b971114c
name: nginx-module-html-sanitize
arch: x86_64
version: 1.29.3+0.2.4
epoch: 2
release: 1.fc43.gps
summary: NGINX module to sanitize HTML 5 with whitelisted elements, attributes and CSS
url: https://github.com/dvershinin/ngx_http_html_sanitize_module
rpm_license: ASL 2.0
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-html-sanitize-1.29.3+0.2.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-html-sanitize-1.29.3+0.2.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  ngx_http_html_sanitize_module - It's base on google's gumbo-parser as
  HTML5 parser and hackers-painters's katana-parser as inline CSS
  parser to sanitize HTML with whitelisted elements, whitelisted
  attributes and whitelisted CSS property.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_html_sanitize_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 3bf1890aae7269dfaf6a3947def3df4a98444f89ac4e6d1f00f357e4242cc570
name: nginx-module-html-sanitize-debuginfo
arch: x86_64
version: 1.29.3+0.2.4
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-html-sanitize
url: https://github.com/dvershinin/ngx_http_html_sanitize_module
rpm_license: ASL 2.0
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-html-sanitize-1.29.3+0.2.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-html-sanitize-debuginfo-1.29.3+0.2.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-html-sanitize.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: b96c80dd042cb5c41042b821e3dedd1cb1571db1c62f5fdbca9dc8decd51d135
name: nginx-module-iconv
arch: x86_64
version: 1.29.3+0.14+0.3.4
epoch: 2
release: 1.fc43.gps
summary: NGINX iconv module
url: https://github.com/calio/iconv-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-iconv-1.29.3+0.14+0.3.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-iconv-1.29.3+0.14+0.3.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This is NGINX module that uses libiconv to convert characters of
  different encoding. It brings 'set_iconv' command to NGINX.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ndk_http_module.so;
      load_module modules/ngx_http_iconv_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 03c1d3aee0b6d88d2aae14fb54b5214a23e397c68337a3ab3e8bdd468efa0f22
name: nginx-module-iconv-debuginfo
arch: x86_64
version: 1.29.3+0.14+0.3.4
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-iconv
url: https://github.com/calio/iconv-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-iconv-1.29.3+0.14+0.3.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-iconv-debuginfo-1.29.3+0.14+0.3.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-iconv.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 20b065dab9cc69e7e209eef377886fdfac7ea94a10b600be040d1f6a0bdb7f1c
name: nginx-module-image-filter
arch: x86_64
version: 1.29.3
epoch: 2
release: 3.fc43.gps
summary: NGINX image filter dynamic module
url: http://nginx.org/
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: 1f6d0d900ac4
rpm_sourcerpm: nginx-module-image-filter-1.29.3-3.fc43.gps.src.rpm
location_href: RPMS/nginx-module-image-filter-1.29.3-3.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX image filter dynamic module


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_image_filter_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 1141ecb5e0f9229515e919994e9314d1c00b0ec1df99604f46258dd856e64e71
name: nginx-module-image-filter-debuginfo
arch: x86_64
version: 1.29.3
epoch: 2
release: 3.fc43.gps
summary: Debug information for package nginx-module-image-filter
url: http://nginx.org/
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: 1f6d0d900ac4
rpm_sourcerpm: nginx-module-image-filter-1.29.3-3.fc43.gps.src.rpm
location_href: RPMS/nginx-module-image-filter-debuginfo-1.29.3-3.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-image-filter.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 3d269fe168bb9c07903bb5aa48dee644ea15095d3661e2ac0e86d6cfd2005616
name: nginx-module-immutable
arch: x86_64
version: 1.29.3+0.0.4
epoch: 2
release: 1.fc43.gps
summary: NGINX module for setting immutable caching on static assets
url: https://github.com/GetPageSpeed/ngx_immutable
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-immutable-1.29.3+0.0.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-immutable-1.29.3+0.0.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This tiny NGINX module can help improve caching of your public
  static assets by setting far future expiration together with
  immutable attribute.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_immutable_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 150117571577a344caad00625fe6396e507f00ccd2f5a7bf5a23d9e364aeb679
name: nginx-module-immutable-debuginfo
arch: x86_64
version: 1.29.3+0.0.4
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-immutable
url: https://github.com/GetPageSpeed/ngx_immutable
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-immutable-1.29.3+0.0.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-immutable-debuginfo-1.29.3+0.0.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-immutable.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 07ea215f7307095e4ef8a6f00dc44d33768f6f521331b475beb568f08ddfa19f
name: nginx-module-ipscrub
arch: x86_64
version: 1.29.3+1.0.1
epoch: 2
release: 1.fc43.gps
summary: IP address anonymizer module for NGINX
url: https://github.com/masonicboom/ipscrub
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-ipscrub-1.29.3+1.0.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-ipscrub-1.29.3+1.0.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This is an IP address anonymizer for NGINX log files.
  It's an nginx module that generates an IP-based hash.
  You can use this hash to link requests from the same source,
  without identifying your users by IP address.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_ipscrub_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 8286b081a4f11f11b304eca23a855dfe611f7a7530eb0d0527b0b378ba71ee5f
name: nginx-module-ipscrub-debuginfo
arch: x86_64
version: 1.29.3+1.0.1
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-ipscrub
url: https://github.com/masonicboom/ipscrub
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-ipscrub-1.29.3+1.0.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-ipscrub-debuginfo-1.29.3+1.0.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-ipscrub.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 35c4a5e9cd731ecb06c23c0d647473e121063fd214ff0710974a20b1782c6577
name: nginx-module-ipset-access
arch: x86_64
version: 1.29.3+1.0.5
epoch: 2
release: 1.fc43.gps
summary: NGINX ipset access module
url: https://github.com/GetPageSpeed/ngx_ipset_access_module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-ipset-access-1.29.3+1.0.5-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-ipset-access-1.29.3+1.0.5-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX module to control user access to sites using ipset


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_ipset_access.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 667bbd8d9e5833ea76530632a2eebde1645e02fdebfb3a0f15b833fe71faf206
name: nginx-module-ipset-access
arch: x86_64
version: 1.29.3+2.0.1
epoch: 2
release: 1.fc43.gps
summary: NGINX ipset access module
url: https://github.com/GetPageSpeed/ngx_ipset_access_module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: 4913bd8b58ec
rpm_sourcerpm: nginx-module-ipset-access-1.29.3+2.0.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-ipset-access-1.29.3+2.0.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX module to control user access to sites using IPSets


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_ipset_access.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 1330fa9e8e29bb13b87077c59f1d2f068b006d7c1139778eda4611b063900c1a
name: nginx-module-ipset-access
arch: x86_64
version: 1.29.4+2.0.4
epoch: 2
release: 1.fc43.gps
summary: Zero-latency IP blocking using Linux kernel ipsets
url: https://github.com/GetPageSpeed/ngx_ipset_access_module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: c1293a346a36
rpm_sourcerpm: nginx-module-ipset-access-1.29.4+2.0.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-ipset-access-1.29.4+2.0.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  High-performance NGINX module for IP-based access control using Linux kernel ipsets.

  **Key Features:**

  - **Blacklist/Whitelist modes** - Block or allow IPs based on ipset membership
  - **Honeypot auto-add** - Automatically add malicious IPs to ipsets with configurable timeouts
  - **Built-in rate limiting** - Per-IP rate limiting with auto-ban to ipsets
  - **JavaScript challenges** - Proof-of-work challenges to filter bots
  - **Dual-stack support** - Works with both IPv4 and IPv6 ipsets
  - **FirewallD compatible** - Integrates with firewall-cmd managed ipsets
  - **Whitelist bypass** - Whitelisted IPs skip rate limiting and challenges
  - **Dry-run mode** - Test rules in production without blocking
  - **Prometheus metrics** - Native `/metrics` endpoint for monitoring
  - **LRU cache** - Shared memory cache for high-performance lookups

  Uses libipset directly (no CLI fallback) for kernel-level performance.
  Compatible with realip module for proper client IP detection behind proxies.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_ipset_access.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 0e469a5661fdd28e725934a7e47a1c5d4409e15f31e34876a4637068bc6ab31b
name: nginx-module-ipset-access
arch: x86_64
version: 1.29.4+2.0.5
epoch: 2
release: 1.fc43.gps
summary: Zero-latency IP blocking using Linux kernel ipsets
url: https://github.com/GetPageSpeed/ngx_ipset_access_module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: 0ee0a5ea4a06
rpm_sourcerpm: nginx-module-ipset-access-1.29.4+2.0.5-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-ipset-access-1.29.4+2.0.5-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  High-performance NGINX module for IP-based access control using Linux kernel ipsets.

  Key Features:

  - Blacklist/Whitelist modes: Block or allow IPs based on ipset membership
  - Honeypot auto-add: Automatically add malicious IPs to ipsets with configurable timeouts and custom HTTP status codes
  - Built-in rate limiting: Per-IP rate limiting with auto-ban to ipsets
  - JavaScript challenges: Proof-of-work challenges to filter bots
  - Dual-stack support: Works with both IPv4 and IPv6 ipsets
  - FirewallD compatible: Integrates with firewall-cmd managed ipsets
  - Whitelist bypass: Whitelisted IPs skip rate limiting and challenges
  - Dry-run mode: Test rules in production without blocking
  - Prometheus metrics: Native /metrics endpoint for monitoring
  - LRU cache: Shared memory cache for high-performance lookups

  Uses libipset directly (no CLI fallback) for kernel-level performance.
  Compatible with realip module for proper client IP detection behind proxies.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_ipset_access.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: c7d20d8ec29e6202a5ebdb4acea166f7e1130e814e1c08318060c1dbc74d3bbd
name: nginx-module-ipset-access
arch: x86_64
version: 1.29.4+2.0.8
epoch: 2
release: 1.fc43.gps
summary: Zero-latency IP blocking using Linux kernel ipsets
url: https://github.com/GetPageSpeed/ngx_ipset_access_module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: b1673606a43b
rpm_sourcerpm: nginx-module-ipset-access-1.29.4+2.0.8-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-ipset-access-1.29.4+2.0.8-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  High-performance NGINX module for IP-based access control using Linux kernel ipsets.

  Key Features:

  - Blacklist/Whitelist modes: Block or allow IPs based on ipset membership
  - Honeypot auto-add: Automatically add malicious IPs to ipsets with configurable timeouts and custom HTTP status codes
  - Built-in rate limiting: Per-IP rate limiting with auto-ban to ipsets
  - JavaScript challenges: Proof-of-work challenges to filter bots
  - Dual-stack support: Works with both IPv4 and IPv6 ipsets
  - FirewallD compatible: Integrates with firewall-cmd managed ipsets
  - Whitelist bypass: Whitelisted IPs skip rate limiting and challenges
  - Dry-run mode: Test rules in production without blocking
  - Prometheus metrics: Native /metrics endpoint for monitoring
  - LRU cache: Shared memory cache for high-performance lookups

  Uses libipset directly (no CLI fallback) for kernel-level performance.
  Compatible with realip module for proper client IP detection behind proxies.

  Note: This module requires CAP_NET_ADMIN capability. The selinux subpackage
  includes a systemd override and helper library to enable this automatically.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_ipset_access.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: a0b7528c7041f83d4b0da25b59976d9f2f1d0c6b430ed2a5f313cb673f0cf58e
name: nginx-module-ipset-access-debuginfo
arch: x86_64
version: 1.29.3+1.0.5
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-ipset-access
url: https://github.com/GetPageSpeed/ngx_ipset_access_module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-ipset-access-1.29.3+1.0.5-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-ipset-access-debuginfo-1.29.3+1.0.5-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-ipset-access.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 358b6e87ea2b8362d2d55c38fcc904debda60f1998f9bc164277d8644a2c2b44
name: nginx-module-ipset-access-selinux
arch: x86_64
version: 1.29.4+2.0.8
epoch: 2
release: 1.fc43.gps
summary: SELinux policy module required to run nginx-module-ipset-access
url: https://github.com/GetPageSpeed/ngx_ipset_access_module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: b1673606a43b
rpm_sourcerpm: nginx-module-ipset-access-1.29.4+2.0.8-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-ipset-access-selinux-1.29.4+2.0.8-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package contains SELinux policy module necessary to run nginx-module-ipset-access.

  Additionally, it includes a capability helper that allows NGINX workers to
  retain CAP_NET_ADMIN after dropping privileges, and a systemd drop-in to
  automatically configure the required capabilities for the nginx service.


pkgId: 334bcc75c9908a8f46eece580ef7050977fc5e59147c2f42de97ea3bb0a911a1
name: nginx-module-ipset-access-selinux-debuginfo
arch: x86_64
version: 1.29.4+2.0.8
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-ipset-access-selinux
url: https://github.com/GetPageSpeed/ngx_ipset_access_module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: b1673606a43b
rpm_sourcerpm: nginx-module-ipset-access-1.29.4+2.0.8-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-ipset-access-selinux-debuginfo-1.29.4+2.0.8-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-ipset-access-selinux.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 179c156cf63ea155461ebe78d72726c7e2acc2e3fe59c9574a5c116565a42413
name: nginx-module-js-challenge
arch: x86_64
version: 1.29.3+0.0.2
epoch: 2
release: 1.fc43.gps
summary: NGINX Javascript challenge module
url: https://github.com/dvershinin/ngx_http_js_challenge_module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-js-challenge-1.29.3+0.0.2-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-js-challenge-1.29.3+0.0.2-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  Similar to Cloudflare's anti-DDoS feature.

  Simple javascript proof-of-work based access for NGINX with
  virtually no overhead.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_js_challenge_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 26c98e62b2065f36315fc0fbffc5735e1cf8870dd00c7efc2c66bbab2ca728dd
name: nginx-module-js-challenge-debuginfo
arch: x86_64
version: 1.29.3+0.0.2
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-js-challenge
url: https://github.com/dvershinin/ngx_http_js_challenge_module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-js-challenge-1.29.3+0.0.2-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-js-challenge-debuginfo-1.29.3+0.0.2-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-js-challenge.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 07ce07bef903bd95f512a1f2271fa1dfbf7bd2ed0183f108bc52821c952ad0d0
name: nginx-module-json
arch: x86_64
version: 1.29.3+0+0.3.4
epoch: 2
release: 1.fc43.gps
summary: NGINX JSON module
url: https://github.com/dvershinin/ngx_http_json_module
rpm_license: MIT
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-json-1.29.3+0+0.3.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-json-1.29.3+0+0.3.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  Dumps json variable $json into string variable $string


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ndk_http_module.so;
      load_module modules/ngx_http_json_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: d3d5f3c6ba2a4032f30eabfee28459832d61fe84db888d6e039ec601b4d3aae0
name: nginx-module-json-debuginfo
arch: x86_64
version: 1.29.3+0+0.3.4
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-json
url: https://github.com/dvershinin/ngx_http_json_module
rpm_license: MIT
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-json-1.29.3+0+0.3.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-json-debuginfo-1.29.3+0+0.3.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-json.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: f0b6e5c6bb34fee0d9e9dd67e7c2577cc4bc814bb762f1495e3e9c7e33d5ab5c
name: nginx-module-json-var
arch: x86_64
version: 1.29.3+1.1
epoch: 2
release: 1.fc43.gps
summary: NGINX JSON variables module
url: https://github.com/dvershinin/nginx-json-var-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-json-var-1.29.3+1.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-json-var-1.29.3+1.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  Module adds the ability to group NGINX variable expressions as JSON.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_json_var_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: ab46b3b5400bcb0a9d5650d5b5093c25e20dabbd706f39995c55123f0846891a
name: nginx-module-json-var-debuginfo
arch: x86_64
version: 1.29.3+1.1
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-json-var
url: https://github.com/dvershinin/nginx-json-var-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-json-var-1.29.3+1.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-json-var-debuginfo-1.29.3+1.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-json-var.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: e2ece9339c60b69045e31bb7f2c4b1760ca23b1b1bfc538d7bd5d285ae1b8030
name: nginx-module-jwt
arch: x86_64
version: 1.29.3+3.4.3
epoch: 2
release: 1.fc43.gps
summary: NGINX JWT Module
url: https://github.com/max-lt/nginx-jwt-module
rpm_license: MIT
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-jwt-1.29.3+3.4.3-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-jwt-1.29.3+3.4.3-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX module to check for a valid JWT.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_auth_jwt_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 04275fe283e084d3d9453f6e87190785702a026bdc5e99931aab90860b40b0ce
name: nginx-module-jwt-debuginfo
arch: x86_64
version: 1.29.3+3.4.3
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-jwt
url: https://github.com/max-lt/nginx-jwt-module
rpm_license: MIT
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-jwt-1.29.3+3.4.3-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-jwt-debuginfo-1.29.3+3.4.3-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-jwt.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 6ad8179079e740dd5981d1b7b4fc1294e510a949f2c5a0973c93a22d9c336259
name: nginx-module-keyval
arch: x86_64
version: 1.29.3+0.3.0
epoch: 2
release: 1.fc43.gps
summary: Nginx module for the key-value store
url: https://github.com/kjdev/nginx-keyval
rpm_license: MIT
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-keyval-1.29.3+0.3.0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-keyval-1.29.3+0.3.0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This nginx module creates variables with values taken from key-value pairs.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_keyval_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 8b4cb01d033ea58ac1778e8dc842f51255240e46818b269730e26ae483a1b86f
name: nginx-module-keyval-debuginfo
arch: x86_64
version: 1.29.3+0.3.0
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-keyval
url: https://github.com/kjdev/nginx-keyval
rpm_license: MIT
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-keyval-1.29.3+0.3.0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-keyval-debuginfo-1.29.3+0.3.0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-keyval.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 57e0226656262613bee719b9628c099a8ea6d7621068f91ace92a1943de21ffd
name: nginx-module-length-hiding
arch: x86_64
version: 1.29.3+1.1.1
epoch: 2
release: 1.fc43.gps
summary: NGINX Length Hiding Filter Module
url: https://github.com/nulab/nginx-length-hiding-filter-module
rpm_license: MIT
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-length-hiding-1.29.3+1.1.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-length-hiding-1.29.3+1.1.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX length hiding filter module provides functionality to append
  randomly generated HTML comment to the end of response body to
  hide correct response length and make it difficult for attackers
  to guess secure token


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_length_hiding_filter_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 597d5eb564c771480fa3d65a7b23dee3d1a3efdb53760b114c86273e730f9be9
name: nginx-module-length-hiding-debuginfo
arch: x86_64
version: 1.29.3+1.1.1
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-length-hiding
url: https://github.com/nulab/nginx-length-hiding-filter-module
rpm_license: MIT
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-length-hiding-1.29.3+1.1.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-length-hiding-debuginfo-1.29.3+1.1.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-length-hiding.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 8df85a9dff5b1e2dce42ccbca0af7ba3179be9f9641b1e94a7ae0eb5cc3bb6b0
name: nginx-module-let
arch: x86_64
version: 1.29.3+0.0.5
epoch: 2
release: 1.fc43.gps
summary: NGINX let module
url: https://github.com/dvershinin/nginx-let-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-let-1.29.3+0.0.5-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-let-1.29.3+0.0.5-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  Adds support for arithmetic operations to NGINX config.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_let_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 11b903242351ae1a3492cb81dcdc8a730e9ed3f1a3266d3205ed18a404cbeccb
name: nginx-module-let-debuginfo
arch: x86_64
version: 1.29.3+0.0.5
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-let
url: https://github.com/dvershinin/nginx-let-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-let-1.29.3+0.0.5-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-let-debuginfo-1.29.3+0.0.5-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-let.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 8a6d042e79ff60fb243df4aa1a48662d3ff9427c503d2d21b0b5cb0e237a4569
name: nginx-module-limit-traffic-rate
arch: x86_64
version: 1.29.3+1.0.0
epoch: 2
release: 1.fc43.gps
summary: NGINX Limiting rate by given variables
url: https://github.com/dvershinin/ngx_http_limit_traffic_ratefilter_module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-limit-traffic-rate-1.29.3+1.0.0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-limit-traffic-rate-1.29.3+1.0.0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX Limiting rate by given variables.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_limit_traffic_rate_filter_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: b6d2a8d1e4d4f327f2072a43e6179ca74b295838c47ae72bc445206c2787e4ff
name: nginx-module-limit-traffic-rate-debuginfo
arch: x86_64
version: 1.29.3+1.0.0
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-limit-traffic-rate
url: https://github.com/dvershinin/ngx_http_limit_traffic_ratefilter_module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-limit-traffic-rate-1.29.3+1.0.0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-limit-traffic-rate-debuginfo-1.29.3+1.0.0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-limit-traffic-rate.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 43184ccdb4ec38bb029ca8713f0302176743f28ba06eecaada87c9273eaa808d
name: nginx-module-live-common
arch: x86_64
version: 1.29.3+2.0.6
epoch: 2
release: 1.fc43.gps
summary: Kaltura Media Framework Common NGINX Module
url: https://github.com/kaltura/media-framework
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-live-common-1.29.3+2.0.6-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-live-common-1.29.3+2.0.6-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  Shared module for exposing an HTTP API, sending HTTP events,
  parsing JSON, KMP/KSMP definitions, etc., used by most
  Kaltura Media Framework NGINX modules.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_api_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 38e26652354529de610fbeffd8166f87cc99c0a42eed4c54b7738213072aab86
name: nginx-module-live-common-debuginfo
arch: x86_64
version: 1.29.3+2.0.6
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-live-common
url: https://github.com/kaltura/media-framework
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-live-common-1.29.3+2.0.6-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-live-common-debuginfo-1.29.3+2.0.6-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-live-common.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 45a83b798c58a3be73f563073c0c9accfc9cc2c229b0853fbbef09f6c3804b16
name: nginx-module-log-sqlite
arch: x86_64
version: 1.29.3+0.0.1
epoch: 2
release: 1.fc43.gps
summary: SQLite logger module for NGINX
url: https://github.com/GetPageSpeed/ngx-sqlite-log
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-log-sqlite-1.29.3+0.0.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-log-sqlite-1.29.3+0.0.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  SQLite logger module for NGINX


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_sqlitelog_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 86a8cb32bd925cb04e5ff8fc1db2e45c04472e561ad865b4e9053f0ccdc4c01c
name: nginx-module-log-sqlite-debuginfo
arch: x86_64
version: 1.29.3+0.0.1
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-log-sqlite
url: https://github.com/GetPageSpeed/ngx-sqlite-log
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-log-sqlite-1.29.3+0.0.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-log-sqlite-debuginfo-1.29.3+0.0.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-log-sqlite.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: b2402bee2a4f59d0c1c3cdcfec0a4aa2ca110b52a9b43e4459ef9e2353b03ee2
name: nginx-module-log-zmq
arch: x86_64
version: 1.29.3+0
epoch: 2
release: 1.fc43.gps
summary: ZeroMQ logger module for NGINX
url: https://github.com/dvershinin/nginx-log-zmq
rpm_license: MIT
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-log-zmq-1.29.3+0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-log-zmq-1.29.3+0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  ZeroMQ logger module for NGINX


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_log_zmq_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 060fffda671334d1dbedf50bd19ee3ed5b48aab538aa6172eec92076fa9ab23d
name: nginx-module-log-zmq-debuginfo
arch: x86_64
version: 1.29.3+0
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-log-zmq
url: https://github.com/dvershinin/nginx-log-zmq
rpm_license: MIT
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-log-zmq-1.29.3+0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-log-zmq-debuginfo-1.29.3+0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-log-zmq.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 731a197069302b383e116e2bb855647c60637a1f527f6bd9b601fe2622a3fe0b
name: nginx-module-lua-debuginfo
arch: x86_64
version: 1.29.4+0.10.29+0.3.4
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-lua
url: https://github.com/openresty/lua-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: f1f8904c9b92
rpm_sourcerpm: nginx-module-lua-1.29.4+0.10.29+0.3.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-lua-debuginfo-1.29.4+0.10.29+0.3.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-lua.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 199d709203d9270da55b1f730af10aa9f91ca0bc00e089e1953eece77a74f03a
name: nginx-module-markdown
arch: x86_64
version: 1.29.3+0.1.6
epoch: 2
release: 1.fc43.gps
summary: Markdown-to-html NGINX module
url: https://github.com/ukarim/ngx_markdown_filter_module
rpm_license: MIT
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-markdown-1.29.3+0.1.6-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-markdown-1.29.3+0.1.6-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX filter module that transforms markdown files to html format

  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_markdown_filter_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: e229d7221f1130850c6604fcc1ae335232c7ba43f2a4770b61db6e63bf814513
name: nginx-module-markdown-debuginfo
arch: x86_64
version: 1.29.3+0.1.6
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-markdown
url: https://github.com/ukarim/ngx_markdown_filter_module
rpm_license: MIT
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-markdown-1.29.3+0.1.6-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-markdown-debuginfo-1.29.3+0.1.6-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-markdown.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 7743230774b10f32265e23770b5b867659b8bfef742aa7c6a692c027642ca37c
name: nginx-module-media-framework
arch: x86_64
version: 1.29.3+2.0.6
epoch: 2
release: 1.fc43.gps
summary: Kaltura Live Media Framework
url: https://github.com/kaltura/media-framework
rpm_license: BSD
rpm_vendor: GetPageSpeed, Inc.
rpm_group: System Environment/Daemons
rpm_buildhost: bdaa1bf65c85
rpm_sourcerpm: nginx-module-media-framework-1.29.3+2.0.6-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-media-framework-1.29.3+2.0.6-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  A distributed framework for live video streaming. The system is
  composed of multiple components, each one responsible for a
  specific function. Enable modules by placing at the top of your
  /etc/nginx/nginx.conf file:

      load_module modules/ngx_http_api_module.so;
      load_module modules/ngx_http_pckg_core_module.so;
      load_module modules/ngx_kmp_in_module.so;
      load_module modules/ngx_kmp_out_module.so;
      load_module modules/ngx_live_module.so;
      load_module modules/ngx_rtmp_kmp_module.so;
      load_module modules/ngx_rtmp_module.so;
      load_module modules/ngx_stream_kmp_cc_module.so;
      load_module modules/ngx_stream_kmp_rtmp_module.so;
      load_module modules/ngx_stream_ts_module.so;
      load_module modules/ngx_ts_kmp_module.so;


pkgId: dd69773236883e6df904025d8948e7efcd64050be5736a40322dbaf6fe1d2d6e
name: nginx-module-memc
arch: x86_64
version: 1.29.3+0.20
epoch: 2
release: 1.fc43.gps
summary: Extended version of the standard NGINX memcached module
url: https://github.com/openresty/memc-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-memc-1.29.3+0.20-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-memc-1.29.3+0.20-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  Extended version of the standard NGINX memcached module


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_memc_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 067caa313ac497b93e79a7e22bf3a311104d97e40ddd1a05fd041b1bb2088418
name: nginx-module-memc-debuginfo
arch: x86_64
version: 1.29.3+0.20
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-memc
url: https://github.com/openresty/memc-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-memc-1.29.3+0.20-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-memc-debuginfo-1.29.3+0.20-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-memc.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 0fc9e4f94d9b79715f6583a73b1cd873fded6187ccf58693bd047f23a19d7857
name: nginx-module-naxsi
arch: x86_64
version: 1.29.3+1.6
epoch: 2
release: 1.fc43.gps
summary: NGINX Anti XSS & SQL Injection module
url: https://github.com/dvershinin/naxsi
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-naxsi-1.29.3+1.6-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-naxsi-1.29.3+1.6-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NAXSI is an open-source, high performance, low rules
  maintenance WAF for NGINX.

  This module, by default, reads a small subset of simple
  (and readable) rules containing 99% of known patterns involved in
  website vulnerabilities. For example, <, | or drop are not supposed
  to be part of a URI.

  Being very simple, those patterns may match legitimate queries, it
  is the Naxsi's administrator duty to add specific rules that will
  whitelist legitimate behaviours. The administrator can either add
  whitelists manually by analyzing nginx's error log, or (recommended)
  start the project with an intensive auto-learning phase that will
  automatically generate whitelisting rules regarding a website's
  behaviour.

  In short, Naxsi behaves like a DROP-by-default firewall, the only
  task is to add required ACCEPT rules for the target website to work
  properly.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_naxsi_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: d6c5e2c1a72ee58cbb1096a13a2f2fd99a38c55872e1e37b9becdbfec6c71b30
name: nginx-module-naxsi-debuginfo
arch: x86_64
version: 1.29.3+1.6
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-naxsi
url: https://github.com/dvershinin/naxsi
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-naxsi-1.29.3+1.6-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-naxsi-debuginfo-1.29.3+1.6-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-naxsi.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 386baa13d0aa69dacabde9e206a4ff7063ca980b6a4345ed4613fbbc7c6c84f4
name: nginx-module-ndk
arch: x86_64
version: 1.29.3+0.3.4
epoch: 2
release: 1.fc43.gps
summary: Nginx Development Kit
url: https://github.com/vision5/ngx_devel_kit
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-ndk-1.29.3+0.3.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-ndk-1.29.3+0.3.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX module that adds additional generic tools that module
  developers can use in their own modules


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ndk_http_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 9084e74a6a7097a786fe94455898bdc00f41ab3de3153b7649a90b9a6d170219
name: nginx-module-ndk-debuginfo
arch: x86_64
version: 1.29.3+0.3.4
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-ndk
url: https://github.com/vision5/ngx_devel_kit
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-ndk-1.29.3+0.3.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-ndk-debuginfo-1.29.3+0.3.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-ndk.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 4e7faf4b88e1d3b5dd8f80c74ddc3bcf9d24112cf0ab549f5bbd7d4406ffa5a6
name: nginx-module-njs
arch: x86_64
version: 1.29.3+0.9.4
epoch: 2
release: 1.fc43.gps
summary: NGINX njs dynamic modules
url: https://github.com/nginx/njs
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-njs-1.29.3+0.9.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-njs-1.29.3+0.9.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX njs dynamic modules


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_js_module.so;
      load_module modules/ngx_stream_js_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 1e6daa47f98b388d87d5102fab321a768ec0ac4a8c992eb59618a701bced2a61
name: nginx-module-njs-debuginfo
arch: x86_64
version: 1.29.3+0.9.4
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-njs
url: https://github.com/nginx/njs
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-njs-1.29.3+0.9.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-njs-debuginfo-1.29.3+0.9.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-njs.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: bccc8fadc81540a49866e71aed3eed525ae4a27047a87a6a7047aad81cd4e369
name: nginx-module-ntlm
arch: x86_64
version: 1.29.3+1.19.4
epoch: 2
release: 1.fc43.gps
summary: NTLM NGINX Module
url: https://github.com/dvershinin/nginx-ntlm-module
rpm_license: MIT
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-ntlm-1.29.3+1.19.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-ntlm-1.29.3+1.19.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX NTLM module allows proxying requests with NTLM Authentication


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_upstream_ntlm_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 6cd82d6bd89bbf7638f6e7941e4100366ea9c5f17b98aa4f9962ee653e08c179
name: nginx-module-ntlm-debuginfo
arch: x86_64
version: 1.29.3+1.19.4
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-ntlm
url: https://github.com/dvershinin/nginx-ntlm-module
rpm_license: MIT
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-ntlm-1.29.3+1.19.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-ntlm-debuginfo-1.29.3+1.19.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-ntlm.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 2114b8235bfb43ee2bec149edb5a45a2ecc79c655401d8eaa60ac9a250b9ba9c
name: nginx-module-pagespeed-debuginfo
arch: x86_64
version: 1.29.3+1.14.36.2
epoch: 0
release: 64.fc43.gps
summary: Debug information for package nginx-module-pagespeed
url: https://www.getpagespeed.com/
rpm_license: ASL 2.0
rpm_vendor: GetPageSpeed, Inc.
rpm_group: Development/Debug
rpm_buildhost: 17460b9a9ce0
rpm_sourcerpm: nginx-module-pagespeed-1.29.3+1.14.36.2-64.fc43.gps.src.rpm
location_href: RPMS/nginx-module-pagespeed-debuginfo-1.29.3+1.14.36.2-64.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-pagespeed.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: d466ff5640758edd3713a485d4910ee189704abd253d253fceb702a84839f99a
name: nginx-module-perl
arch: x86_64
version: 1.29.3
epoch: 2
release: 2.fc43.gps
summary: NGINX Perl dynamic module
url: http://nginx.org/
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-perl-1.29.3-2.fc43.gps.src.rpm
location_href: RPMS/nginx-module-perl-1.29.3-2.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX Perl dynamic module


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_perl_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 7cc170bebc82773c47d68460a4427710fc0c9c33bfdbb9218b3420a8eb3e7805
name: nginx-module-perl-debuginfo
arch: x86_64
version: 1.29.3
epoch: 2
release: 2.fc43.gps
summary: Debug information for package nginx-module-perl
url: http://nginx.org/
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-perl-1.29.3-2.fc43.gps.src.rpm
location_href: RPMS/nginx-module-perl-debuginfo-1.29.3-2.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-perl.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 73c2ed3c2aab0251283198e0b75ee91a7aec0b851d963740d354cb94ff5fa8c1
name: nginx-module-phantom-token
arch: x86_64
version: 1.29.3+2.0.0
epoch: 2
release: 1.fc43.gps
summary: Phantom Token NGINX Module
url: https://github.com/curityio/nginx_phantom_token_module
rpm_license: ASL 2.0
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-phantom-token-1.29.3+2.0.0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-phantom-token-1.29.3+2.0.0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX module that introspects phantom access tokens according to RFC 7662


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_curity_http_phantom_token_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: d8e4d68e3c67ebb58cdb492c103c0ba674bea8b66138b5c064d0b6e8eb6f3323
name: nginx-module-phantom-token-debuginfo
arch: x86_64
version: 1.29.3+2.0.0
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-phantom-token
url: https://github.com/curityio/nginx_phantom_token_module
rpm_license: ASL 2.0
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-phantom-token-1.29.3+2.0.0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-phantom-token-debuginfo-1.29.3+2.0.0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-phantom-token.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 1fa593c21b2d35066ced88ad2d28f975397042c8c974198f7769de3d77081684
name: nginx-module-pipelog
arch: x86_64
version: 1.29.3+1.0.4
epoch: 2
release: 1.fc43.gps
summary: NGINX pipelog module
url: https://github.com/pandax381/ngx_http_pipelog_module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d83cec7c9b32
rpm_sourcerpm: nginx-module-pipelog-1.29.3+1.0.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-pipelog-1.29.3+1.0.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  An NGINX module for sending HTTP access logs to an external program via pipe.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_pipelog_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: b7934bf33db220742621b41b01b0728fef43ea60a284ad2508cd1e7455222805
name: nginx-module-pipelog-debuginfo
arch: x86_64
version: 1.29.3+1.0.4
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-pipelog
url: https://github.com/pandax381/ngx_http_pipelog_module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d83cec7c9b32
rpm_sourcerpm: nginx-module-pipelog-1.29.3+1.0.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-pipelog-debuginfo-1.29.3+1.0.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-pipelog.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 105770ed9d441c658ac6c3eb499b72584ab22be9ca97e493a20bf9edcb894a7f
name: nginx-module-postgres
arch: x86_64
version: 1.29.3+1.0
epoch: 2
release: 1.fc43.gps
summary: PostgreSQL module for NGINX
url: https://github.com/dvershinin/ngx_postgres
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-postgres-1.29.3+1.0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-postgres-1.29.3+1.0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  Upstream module that allows NGINX to communicate directly with
  PostgreSQL database.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_postgres_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 5e21f979cf1c457cadd6becfb6ae566a15d31fc5858b5b0a281089257258beb4
name: nginx-module-postgres-debuginfo
arch: x86_64
version: 1.29.3+1.0
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-postgres
url: https://github.com/dvershinin/ngx_postgres
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-postgres-1.29.3+1.0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-postgres-debuginfo-1.29.3+1.0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-postgres.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: c32f79ffbcaae9735428891d6787873bde7fc2ea4f976385927e7e6027edfb7a
name: nginx-module-pta
arch: x86_64
version: 1.29.3+1.0.2
epoch: 2
release: 1.fc43.gps
summary: Period of Time Authentication module for NGINX
url: https://github.com/iij/pta
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-pta-1.29.3+1.0.2-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-pta-1.29.3+1.0.2-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  PTA (Period of Time Authentication) module is a module for NGINX.
  Using PTA you can control access to your contents. PTA calculates
  a encrypted query string that includes an expiration time and a
  path of the content.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_pta_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: e9a1b0b2fd81b94ef96c68cdcde0b989f3927b5ae84a33d75e4b05f0d309c038
name: nginx-module-pta-debuginfo
arch: x86_64
version: 1.29.3+1.0.2
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-pta
url: https://github.com/iij/pta
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-pta-1.29.3+1.0.2-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-pta-debuginfo-1.29.3+1.0.2-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-pta.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 6d22204a33d002c547ada3d5f02201e66d04c232bc825333be3cc5d46366ce97
name: nginx-module-push-stream
arch: x86_64
version: 1.29.3+0.6.0
epoch: 2
release: 1.fc43.gps
summary: NGINX push stream module
url: https://github.com/wandenberg/nginx-push-stream-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-push-stream-1.29.3+0.6.0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-push-stream-1.29.3+0.6.0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  A pure stream HTTP push technology for your NGINX setup


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_push_stream_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 8965c80efd9907968ebd981528b5775f12e4b7ea0c7ade7aca0e58da3a5a63bc
name: nginx-module-push-stream-debuginfo
arch: x86_64
version: 1.29.3+0.6.0
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-push-stream
url: https://github.com/wandenberg/nginx-push-stream-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-push-stream-1.29.3+0.6.0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-push-stream-debuginfo-1.29.3+0.6.0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-push-stream.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: cd08bb810ac87186e3882a526de98df2fdfec33b33cf1f75232a5b7e3a83d586
name: nginx-module-rdns
arch: x86_64
version: 1.29.3+0
epoch: 2
release: 1.fc43.gps
summary: NGINX HTTP rDNS module
url: https://github.com/dvershinin/nginx-http-rdns
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-rdns-1.29.3+0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-rdns-1.29.3+0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This module allows to make a reverse DNS (rDNS) lookup
  for incoming connection and provides simple access control
  of incoming hostname by allow/deny rules (similar to
  HttpAccessModule allow/deny directives; regular expressions
  are supported).

  Module works with the DNS server defined by the standard
  resolver directive. This module uses nginx core resolver
  cache when resolving DNS lookup, for a maximum of 30
  seconds or DNS response TTL.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_rdns_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 2ceddfb5ca9e369f7399c376b7352959ba5b3403a8194a3c9e35f92ebeb31d12
name: nginx-module-rdns-debuginfo
arch: x86_64
version: 1.29.3+0
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-rdns
url: https://github.com/dvershinin/nginx-http-rdns
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-rdns-1.29.3+0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-rdns-debuginfo-1.29.3+0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-rdns.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 626cb924ed59f43d97a9936079a98797a7d5074c4964490d5e995c08ff3e3f15
name: nginx-module-redis-rate-limit
arch: x86_64
version: 1.29.3+1.0.0
epoch: 2
release: 1.fc43.gps
summary: Redis backed rate limit module for Nginx
url: https://github.com/weserv/rate-limit-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-redis-rate-limit-1.29.3+1.0.0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-redis-rate-limit-1.29.3+1.0.0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  A Redis backed rate limit module for NGINX web servers.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_rate_limit_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 9b619c6f988faadb66c873016a6a9e9a8c9b11435062cb2d7c4d19ea60232df4
name: nginx-module-redis-rate-limit-debuginfo
arch: x86_64
version: 1.29.3+1.0.0
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-redis-rate-limit
url: https://github.com/weserv/rate-limit-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-redis-rate-limit-1.29.3+1.0.0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-redis-rate-limit-debuginfo-1.29.3+1.0.0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-redis-rate-limit.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 1c46dd6bf0ae7f5b107911c9fa4703a57c01c81a93e18065ab13c51fd05b272f
name: nginx-module-redis2
arch: x86_64
version: 1.29.3+0.15
epoch: 2
release: 1.fc43.gps
summary: NGINX upstream module for the Redis 2.0 protocol
url: https://github.com/openresty/redis2-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-redis2-1.29.3+0.15-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-redis2-1.29.3+0.15-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX upstream module for the Redis 2.0 protocol


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_redis2_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: e4e712d116bc96c4ed29dfe6361890b6ccc9f5f24401e21a715467a3982d3fcb
name: nginx-module-redis2-debuginfo
arch: x86_64
version: 1.29.3+0.15
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-redis2
url: https://github.com/openresty/redis2-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-redis2-1.29.3+0.15-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-redis2-debuginfo-1.29.3+0.15-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-redis2.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: f6f948f2c756a7339638cefd172d21701fd2755410daa828318f6ae56fb9da93
name: nginx-module-rtmp
arch: x86_64
version: 1.29.3+1.2.2
epoch: 2
release: 1.fc43.gps
summary: NGINX RTMP module
url: https://github.com/dvershinin/nginx-rtmp-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-rtmp-1.29.3+1.2.2-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-rtmp-1.29.3+1.2.2-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX-based Media Streaming Server


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_rtmp_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 96acf2385e509b61b93f392f25fddef8eb2dc9784429735588589e3437465383
name: nginx-module-rtmp-debuginfo
arch: x86_64
version: 1.29.3+1.2.2
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-rtmp
url: https://github.com/dvershinin/nginx-rtmp-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-rtmp-1.29.3+1.2.2-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-rtmp-debuginfo-1.29.3+1.2.2-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-rtmp.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: ada03a4038f320915ef9c18d107c765009882a2a3d6389fa77ff506797c58db5
name: nginx-module-secure-token
arch: x86_64
version: 1.29.3+1.5
epoch: 2
release: 1.fc43.gps
summary: Secure token module for NGINX
url: https://github.com/kaltura/nginx-secure-token-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-secure-token-1.29.3+1.5-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-secure-token-1.29.3+1.5-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  Generates CDN tokens, either as a cookie or as a query string
  parameter (m3u8,mpd,f4m only).

  Currently supports Akamai v2 tokens, and Amazon CloudFront tokens.
  In addition, the module supports the encryption of URIs with a
  configured key


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_secure_token_filter_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: d93a4d794f4989f328262d0616308c4ba238f18deb12f370ca71fc0688da3aa2
name: nginx-module-secure-token-debuginfo
arch: x86_64
version: 1.29.3+1.5
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-secure-token
url: https://github.com/kaltura/nginx-secure-token-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-secure-token-1.29.3+1.5-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-secure-token-debuginfo-1.29.3+1.5-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-secure-token.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 7b4bef429ff26471b616779d8a05aea6548feaa6366386ebb50423cf1762845a
name: nginx-module-security-debuginfo
arch: x86_64
version: 1.29.3+1.0.4
epoch: 2
release: 9.fc43.gps
summary: Debug information for package nginx-module-security
url: https://github.com/owasp-modsecurity/ModSecurity-nginx
rpm_license: ASL 2.0
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: 254ce6b87f81
rpm_sourcerpm: nginx-module-security-1.29.3+1.0.4-9.fc43.gps.src.rpm
location_href: RPMS/nginx-module-security-debuginfo-1.29.3+1.0.4-9.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-security.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 485b2d757b0361ed20db11a3734e08016bad14e5a137bccac92bc01bb78ec43c
name: nginx-module-security-headers
arch: x86_64
version: 1.29.3+0.1.2
epoch: 2
release: 1.fc43.gps
summary: NGINX module for sending security headers
url: https://github.com/GetPageSpeed/ngx_security_headers
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-security-headers-1.29.3+0.1.2-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-security-headers-1.29.3+0.1.2-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This NGINX module adds security headers and removes insecure headers
  easily and according to HTTP specifications


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_security_headers_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 2ae2180620ded8b509792f9878c3ee592ee74a534acc1d652042a92e0b836b49
name: nginx-module-security-headers-debuginfo
arch: x86_64
version: 1.29.3+0.1.2
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-security-headers
url: https://github.com/GetPageSpeed/ngx_security_headers
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-security-headers-1.29.3+0.1.2-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-security-headers-debuginfo-1.29.3+0.1.2-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-security-headers.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: dfd6e3f50661fa4ebccf01527b2a2690d3bd4a354fc770423eb342ff2764f383
name: nginx-module-set-misc
arch: x86_64
version: 1.29.3+0.33+0.3.4
epoch: 2
release: 1.fc43.gps
summary: NGINX Set-Misc module
url: https://github.com/openresty/set-misc-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-set-misc-1.29.3+0.33+0.3.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-set-misc-1.29.3+0.33+0.3.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  Various set_xxx directives added to NGINX's rewrite module
  (md5/sha1, sql/json quoting, and many more).


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ndk_http_module.so;
      load_module modules/ngx_http_set_misc_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 701d92f18b2b60060be1be78b19fe5283343d7bffbfa5be726b0b41f7ca4fe50
name: nginx-module-set-misc-debuginfo
arch: x86_64
version: 1.29.3+0.33+0.3.4
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-set-misc
url: https://github.com/openresty/set-misc-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-set-misc-1.29.3+0.33+0.3.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-set-misc-debuginfo-1.29.3+0.33+0.3.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-set-misc.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: aabf6750f62de130a4ba1c2aad757281bd80572d23ef9811b42b036bae5d1b4b
name: nginx-module-shibboleth
arch: x86_64
version: 1.29.3+2.0.2
epoch: 2
release: 1.fc43.gps
summary: Shibboleth Auth Request module for NGINX
url: https://github.com/nginx-shib/nginx-http-shibboleth
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-shibboleth-1.29.3+2.0.2-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-shibboleth-1.29.3+2.0.2-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This module allows NGINX to work with Shibboleth, by way of
  Shibboleth's FastCGI authorizer. This module requires specific
  configuration in order to work correctly, as well as Shibboleth's
  FastCGI authorizer application available on the system.

  It aims to be similar to parts of Apache's mod_shib, though
  Shibboleth authorisation and authentication settings are configured
  via shibboleth2.xml rather than in the web server configuration.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_shibboleth_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 592d24cff98ae3e2853046752236e67318be0fc212ad9b4b70951e0931131460
name: nginx-module-shibboleth-debuginfo
arch: x86_64
version: 1.29.3+2.0.2
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-shibboleth
url: https://github.com/nginx-shib/nginx-http-shibboleth
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-shibboleth-1.29.3+2.0.2-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-shibboleth-debuginfo-1.29.3+2.0.2-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-shibboleth.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: c81c64226e4d3a84741553aad9574e0b1ee8061940e9b11f85e84b0e3ff188c9
name: nginx-module-slowfs
arch: x86_64
version: 1.29.3+1.11
epoch: 2
release: 1.fc43.gps
summary: NGINX SlowFS Cache Module
url: https://github.com/dvershinin/ngx_slowfs_cache
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-slowfs-1.29.3+1.11-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-slowfs-1.29.3+1.11-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX module which adds ability to cache static files.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_slowfs_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: a918fe41f8c23bb1d7bc1839a62b1bc4b3c4c2da2af3bb8d290bb81daa6f04c0
name: nginx-module-slowfs-debuginfo
arch: x86_64
version: 1.29.3+1.11
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-slowfs
url: https://github.com/dvershinin/ngx_slowfs_cache
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-slowfs-1.29.3+1.11-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-slowfs-debuginfo-1.29.3+1.11-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-slowfs.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: b70a010c24b7ae28dd44966f325792e1e62a3353581f20f01926d18a864f721f
name: nginx-module-sorted-args
arch: x86_64
version: 1.29.4+1.0.0
epoch: 2
release: 1.fc43.gps
summary: HTTP querystring parameters normalization for NGINX
url: https://github.com/GetPageSpeed/ngx_http_sorted_args
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: 2b86b2c94598
rpm_sourcerpm: nginx-module-sorted-args-1.29.4+1.0.0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-sorted-args-1.29.4+1.0.0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  Powerful NGINX module that normalizes HTTP request querystring parameters
  by sorting them alphanumerically.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_sorted_args.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: f9ace15034981d8c8af47ae89cac2f6785836532a3bc41fa10ec57d0d8a200ee
name: nginx-module-sorted-args-debuginfo
arch: x86_64
version: 1.29.4+1.0.0
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-sorted-args
url: https://github.com/GetPageSpeed/ngx_http_sorted_args
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: 2b86b2c94598
rpm_sourcerpm: nginx-module-sorted-args-1.29.4+1.0.0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-sorted-args-debuginfo-1.29.4+1.0.0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-sorted-args.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 2ca9bf0ec0da99f2e4304b8c588e138d2d20332e783ba21597adbe28456a0a3d
name: nginx-module-spnego-http-auth
arch: x86_64
version: 1.29.3+1.1.3
epoch: 2
release: 1.fc43.gps
summary: Nginx module for HTTP SPNEGO auth
url: https://github.com/stnoonan/spnego-http-auth-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-spnego-http-auth-1.29.3+1.1.3-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-spnego-http-auth-1.29.3+1.1.3-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This module implements adds SPNEGO support to NGINX.
  It currently supports only Kerberos authentication via GSSAPI.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_auth_spnego_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: a00a9289c0ced3960a1e0026c8979a4f130c1fb52477a97a62a132957bcc8095
name: nginx-module-spnego-http-auth-debuginfo
arch: x86_64
version: 1.29.3+1.1.3
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-spnego-http-auth
url: https://github.com/stnoonan/spnego-http-auth-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-spnego-http-auth-1.29.3+1.1.3-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-spnego-http-auth-debuginfo-1.29.3+1.1.3-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-spnego-http-auth.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: fea092e86c74c069ca5220a9935e73c6a455fd527a628156f238297660f2bbc6
name: nginx-module-srcache
arch: x86_64
version: 1.29.3+0.32
epoch: 2
release: 1.fc43.gps
summary: Transparent subrequest-based caching layout for arbitrary NGINX locations
url: https://github.com/dvershinin/srcache-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-srcache-1.29.3+0.32-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-srcache-1.29.3+0.32-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This module provides a transparent caching layer for arbitrary NGINX
  locations (like those use an upstream or even serve static disk
  files).

  The caching behavior is mostly compatible with RFC 2616.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_srcache_filter_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: e61055f5ff0d6e3740aec34ebb3c8cc3f83cdeb250771e4d5f32f35439cf9bc7
name: nginx-module-srcache-debuginfo
arch: x86_64
version: 1.29.3+0.32
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-srcache
url: https://github.com/dvershinin/srcache-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-srcache-1.29.3+0.32-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-srcache-debuginfo-1.29.3+0.32-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-srcache.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 68ced9ed0c69bdc3ff7e808cc71a889218584d564d7763d6cbbdd8f7b8308908
name: nginx-module-statsd
arch: x86_64
version: 1.29.3+0.0.1
epoch: 2
release: 1.fc43.gps
summary: NGINX module for sending stats to statsd
url: https://github.com/dvershinin/nginx-statsd
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-statsd-1.29.3+0.0.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-statsd-1.29.3+0.0.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX module for sending stats to statsd


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_statsd_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 927470e0034d014d7eb7148163dffe2148b8c3011f702e4756827728c2a00781
name: nginx-module-statsd-debuginfo
arch: x86_64
version: 1.29.3+0.0.1
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-statsd
url: https://github.com/dvershinin/nginx-statsd
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-statsd-1.29.3+0.0.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-statsd-debuginfo-1.29.3+0.0.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-statsd.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 8d2eba8800cb512c158173108f3b1453d8efb435d6bd04437bf33b08825fa28b
name: nginx-module-sticky
arch: x86_64
version: 1.29.3+1.3.0
epoch: 2
release: 1.fc43.gps
summary: NGINX sticky cookie module
url: https://github.com/dvershinin/nginx-sticky-module-ng
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-sticky-1.29.3+1.3.0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-sticky-1.29.3+1.3.0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX module to add a sticky cookie to be always forwarded to the
  same upstream server


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_sticky_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 230c66d980f470563960c583f564632864f0abe9a1e93d2cca798e604949caea
name: nginx-module-sticky-debuginfo
arch: x86_64
version: 1.29.3+1.3.0
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-sticky
url: https://github.com/dvershinin/nginx-sticky-module-ng
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-sticky-1.29.3+1.3.0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-sticky-debuginfo-1.29.3+1.3.0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-sticky.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 47e6441ac0fe3ef68ecc2cb746128804601a83d358b63f5d4baae2ab75a957ce
name: nginx-module-stream-sts
arch: x86_64
version: 1.29.3+0.1.1
epoch: 2
release: 1.fc43.gps
summary: Nginx stream server traffic status core module
url: https://github.com/vozlt/nginx-module-stream-sts
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-stream-sts-1.29.3+0.1.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-stream-sts-1.29.3+0.1.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  Nginx stream server traffic status core module.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_stream_server_traffic_status_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: d67e3b2fd3b32bb20aecef5d766881d469e9880bd0e7481f93c5bbc622eb8251
name: nginx-module-stream-sts-debuginfo
arch: x86_64
version: 1.29.3+0.1.1
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-stream-sts
url: https://github.com/vozlt/nginx-module-stream-sts
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-stream-sts-1.29.3+0.1.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-stream-sts-debuginfo-1.29.3+0.1.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-stream-sts.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 95b86b78c0141c23417cc8494f15aa37f07cab822cf2c7d44f17d1733c93b75c
name: nginx-module-stream-upsync
arch: x86_64
version: 1.29.3+1.2.2
epoch: 2
release: 1.fc43.gps
summary: NGINX module for syncing stream backends from consul or etcd
url: https://github.com/xiaokai-wang/nginx-stream-upsync-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-stream-upsync-1.29.3+1.2.2-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-stream-upsync-1.29.3+1.2.2-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX module which allows to sync upstreams from consul or others,
  dynamically modify backend-servers attribute(weight, max_fails,...),
  needn't reload nginx.

  It may not always be convenient to modify configuration files and restart
  NGINX. For example, if you are experiencing large amounts of traffic and high
  load, restarting NGINX and reloading the configuration at that point further
  increases load on the system and can temporarily degrade performance.

  The module can be more smoothly expansion and constriction, and will not
  influence the performance.

  This module is for stream backends!

  Another module, nginx-module-upsync is for HTTP backends


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_stream_upsync_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: c7226863c34c80131d6ef4578e0c0c51473f150b1197a3bf3dad5951f30cf6d3
name: nginx-module-stream-upsync-debuginfo
arch: x86_64
version: 1.29.3+1.2.2
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-stream-upsync
url: https://github.com/xiaokai-wang/nginx-stream-upsync-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-stream-upsync-1.29.3+1.2.2-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-stream-upsync-debuginfo-1.29.3+1.2.2-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-stream-upsync.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: e3354d5daac69fbc30e05d5d2b38ee6a7b846b5a3c2725e3dd3df56b4eece8bb
name: nginx-module-sts
arch: x86_64
version: 1.29.3+0.1.1
epoch: 2
release: 1.fc43.gps
summary: Nginx stream server traffic status module
url: https://github.com/vozlt/nginx-module-sts
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-sts-1.29.3+0.1.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-sts-1.29.3+0.1.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX stream server traffic status module.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_stream_server_traffic_status_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 8f8a057ecd3a6a9b13574f946c032928700a944616faffa09f54e014f7057375
name: nginx-module-sts-debuginfo
arch: x86_64
version: 1.29.3+0.1.1
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-sts
url: https://github.com/vozlt/nginx-module-sts
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-sts-1.29.3+0.1.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-sts-debuginfo-1.29.3+0.1.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-sts.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 24b5a73805d66ab55b16f34ec36c30cb8d5ee34a6a0b42b48114a1e6c39f9dcc
name: nginx-module-substitutions
arch: x86_64
version: 1.29.3+0.6.6
epoch: 2
release: 1.fc43.gps
summary: String substitutions module for nginx
url: https://github.com/dvershinin/ngx_http_substitutions_filter_module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-substitutions-1.29.3+0.6.6-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-substitutions-1.29.3+0.6.6-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  nginx_substitutions_filter is a filter module which can do
  both regular expression and fixed string substitutions on
  response bodies.

  This module is quite different from the Nginx's native
  Substitution Module.

  It scans the output chains buffer and matches string
  line by line, just like Apache's mod_substitute

  For any issues, see bug tracker at
  https://github.com/yaoweibin/ngx_http_substitutions_filter_module/issues
  and reference commit b8a71eacc7f986ba091282ab8b1bbbc6ae1807e0
  if requested, not the version of the package.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_subs_filter_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 4716200229ee30f6fa605b2214295de6537371969772afa0fcd8335cb20f0d17
name: nginx-module-substitutions-debuginfo
arch: x86_64
version: 1.29.3+0.6.6
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-substitutions
url: https://github.com/dvershinin/ngx_http_substitutions_filter_module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-substitutions-1.29.3+0.6.6-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-substitutions-debuginfo-1.29.3+0.6.6-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-substitutions.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: c881ae4c147e0e0a946281ccb2f185410ca4d8a94cfc534468bd300e0ae3bdea
name: nginx-module-sysguard
arch: x86_64
version: 1.29.3+0.0.1
epoch: 2
release: 1.fc43.gps
summary: NGINX sysguard module
url: https://github.com/dvershinin/nginx-module-sysguard
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-sysguard-1.29.3+0.0.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-sysguard-1.29.3+0.0.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This module can be used to protect your server in case system
  load, memory use goes too high or requests are responded too slow


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_sysguard_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 330e0be0b41b330ff5d85881c6b2d77b200f1291d7e66f9007c1d8b2df7abb89
name: nginx-module-sysguard-debuginfo
arch: x86_64
version: 1.29.3+0.0.1
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-sysguard
url: https://github.com/dvershinin/nginx-module-sysguard
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-sysguard-1.29.3+0.0.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-sysguard-debuginfo-1.29.3+0.0.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-sysguard.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 0a23bcd7cd708c021bcc9a7cca31d41223340d3b77e0df5a776e5e3754f1432d
name: nginx-module-teslagov-jwt
arch: x86_64
version: 1.29.4+2.4.0
epoch: 2
release: 1.fc43.gps
summary: Secure your NGINX locations with JWT
url: https://github.com/TeslaGov/ngx-http-auth-jwt-module
rpm_license: MIT
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: cde88ccd1ddb
rpm_sourcerpm: nginx-module-teslagov-jwt-1.29.4+2.4.0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-teslagov-jwt-1.29.4+2.4.0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This is an NGINX module to check for a valid JWT and proxy to an upstream
  server or redirect to a login page. It supports additional features such as
  extracting claims from the JWT and placing them on the request/response
  headers


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_auth_jwt_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 0c9945983715016216d825a0e4a9b42a13ce314c23f697a6574418255e141991
name: nginx-module-teslagov-jwt-debuginfo
arch: x86_64
version: 1.29.4+2.4.0
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-teslagov-jwt
url: https://github.com/TeslaGov/ngx-http-auth-jwt-module
rpm_license: MIT
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: cde88ccd1ddb
rpm_sourcerpm: nginx-module-teslagov-jwt-1.29.4+2.4.0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-teslagov-jwt-debuginfo-1.29.4+2.4.0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-teslagov-jwt.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 4937eff339fbc99758e19f23b939553774ca1944956069bd62c3801eee2fc3ea
name: nginx-module-testcookie
arch: x86_64
version: 1.29.3+1.28
epoch: 2
release: 1.fc43.gps
summary: NGINX testcookie robot mitigation module
url: https://github.com/dvershinin/testcookie-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-testcookie-1.29.3+1.28-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-testcookie-1.29.3+1.28-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  Simple robot mitigation module using cookie based challenge/response
  technique. Not supported any more.

  Challenge cookies can be set using different methods:

  * "Set-Cookie" + 302/307 HTTP Location redirect
  * "Set-Cookie" + HTML meta refresh redirect
  * Custom template, JavaScript can be used here.

  To prevent automatic parsing, challenge cookie value can be encrypted
  with AES-128 in CBC mode using custom/random key and iv, and then
  decrypted at client side with JavaScript.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_testcookie_access_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 8ac164c31bd139b69bf342578b1d52fd910b8ff06dd4e1f9bcab219194210c34
name: nginx-module-testcookie-debuginfo
arch: x86_64
version: 1.29.3+1.28
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-testcookie
url: https://github.com/dvershinin/testcookie-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-testcookie-1.29.3+1.28-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-testcookie-debuginfo-1.29.3+1.28-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-testcookie.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 35c0a3318ba746ad12530feb2b4adffcf6789f3f8ee6097d7d97c7b5430a6751
name: nginx-module-traffic-accounting
arch: x86_64
version: 1.29.3+2.0.4
epoch: 2
release: 1.fc43.gps
summary: Monitor the incoming and outgoing traffic metrics in realtime for NGINX
url: https://github.com/dvershinin/traffic-accounting-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-traffic-accounting-1.29.3+2.0.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-traffic-accounting-1.29.3+2.0.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  Monitor the incoming and outgoing traffic metrics in realtime for NGINX.

  Now accounting module supports both HTTP and STREAM subsystems

  A realtime traffic and status code monitor solution for NGINX, which needs
  less memory and cpu than other realtime log analyzing solutions.
  Useful for traffic accounting based on NGINX config logic
  (by location / server / user-defined-variables).


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_accounting_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 7730e83b180251aac79cf29d00337c0a06898cf7b8d0b2d5ca5af000b763f1f8
name: nginx-module-traffic-accounting-debuginfo
arch: x86_64
version: 1.29.3+2.0.4
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-traffic-accounting
url: https://github.com/dvershinin/traffic-accounting-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-traffic-accounting-1.29.3+2.0.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-traffic-accounting-debuginfo-1.29.3+2.0.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-traffic-accounting.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 3181684e89a77d84090abc885407d54c1d671e5a6991a5637f5a6e7a6da92ae9
name: nginx-module-ts
arch: x86_64
version: 1.29.3+0.1.1
epoch: 2
release: 1.fc43.gps
summary: NGINX MPEG-TS Live Module
url: https://github.com/arut/nginx-ts-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-ts-1.29.3+0.1.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-ts-1.29.3+0.1.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX MPEG-TS Live Module:
    * receives MPEG-TS over HTTP
    * produces and manages live HLS
    * produces and manages live MPEG-DASH


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_ts_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: e4b71ef1c9936a4c2b88a3f75c91b31d85866923ee4f86cd5c66e4d65dc9d42e
name: nginx-module-ts-debuginfo
arch: x86_64
version: 1.29.3+0.1.1
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-ts
url: https://github.com/arut/nginx-ts-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-ts-1.29.3+0.1.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-ts-debuginfo-1.29.3+0.1.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-ts.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: f3e44166336bc7c5678c5c05ff36be2e2e693b90c5af1abdc21d7f9b17180ddd
name: nginx-module-unbrotli
arch: x86_64
version: 1.29.3+0.0.2
epoch: 2
release: 1.fc43.gps
summary: Decompresses Brotli-encoded responses for clients that do not support it
url: https://github.com/dvershinin/ngx_unbrotli
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-unbrotli-1.29.3+0.0.2-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-unbrotli-1.29.3+0.0.2-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  The ngx_unbrotli module is a filter that decompresses responses with
  Content-Encoding: br for clients that do not support Brotli encoding method.
  It allows to save I/O by unconditional Brotli compression of responses.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_unbrotli_filter_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: c19ed1a662b6bcc9b1f2df3b9afda67bd119325eb6382f446f39c099ffac8195
name: nginx-module-unbrotli-debuginfo
arch: x86_64
version: 1.29.3+0.0.2
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-unbrotli
url: https://github.com/dvershinin/ngx_unbrotli
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-unbrotli-1.29.3+0.0.2-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-unbrotli-debuginfo-1.29.3+0.0.2-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-unbrotli.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 2aa12bfce5664ef78903c28438933237ade447c9b93f6ed0667c8f224eb3608c
name: nginx-module-untar
arch: x86_64
version: 1.29.3+1.1
epoch: 2
release: 1.fc43.gps
summary: NGINX HTTP Untar Module
url: https://github.com/ajax16384/ngx_http_untar_module
rpm_license: MIT
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-untar-1.29.3+1.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-untar-1.29.3+1.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This NGINX module can serve static file content directly from tar
  archives. Inspired by nginx-unzip-module.

  Features:
    * Zero-copy: outputs content directly from archive file
      (no temporary files)
    * Caching parsed archive file entries: reduce archive
      scan-search time
    * Supported tar item types: normal file, long file name data

  Configuration example:

      location ~ ^/(.+?\.tar)/(.*)$ {
          untar_archive "$document_root/$1";
          untar_file "$2";
          untar;
      }


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_untar_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 88a00b15ebfa77c8e2631aa598ae53f56772916b76f9b9158220a72f7781183c
name: nginx-module-untar-debuginfo
arch: x86_64
version: 1.29.3+1.1
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-untar
url: https://github.com/ajax16384/ngx_http_untar_module
rpm_license: MIT
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-untar-1.29.3+1.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-untar-debuginfo-1.29.3+1.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-untar.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 1e58bcd9d7c143c079a813f0929432a327d3bb1d26253b0af6054f8595d944d4
name: nginx-module-upload
arch: x86_64
version: 1.29.3+2.3.0
epoch: 2
release: 1.fc43.gps
summary: NGINX module for handling file uploads
url: https://github.com/fdintino/nginx-upload-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-upload-1.29.3+2.3.0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-upload-1.29.3+2.3.0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  A module for NGINX for handling file uploads using
  multipart/form-data encoding (RFC 1867) and resumable uploads
  according to this protocol.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_upload_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: dc207f0a9642e5aeadfb8b223eadf268cbabc73d0da2d972a889fb6471aa133c
name: nginx-module-upload-debuginfo
arch: x86_64
version: 1.29.3+2.3.0
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-upload
url: https://github.com/fdintino/nginx-upload-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-upload-1.29.3+2.3.0-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-upload-debuginfo-1.29.3+2.3.0-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-upload.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: b6f55757b4af99c25479d3a86bf8d465c981433f02d19217fda118728bb94bf6
name: nginx-module-upstream-fair
arch: x86_64
version: 1.29.3+0.1.3
epoch: 2
release: 1.fc43.gps
summary: The fair load balancer module for NGINX
url: https://github.com/itoffshore/nginx-upstream-fair
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-upstream-fair-1.29.3+0.1.3-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-upstream-fair-1.29.3+0.1.3-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  The fair load balancer module for NGINX

  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_upstream_fair_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: ce6c9ad59d2817dabc5ac9d01dbaecdf3cfe690ec284ebe45957c4eaa6276b57
name: nginx-module-upstream-fair-debuginfo
arch: x86_64
version: 1.29.3+0.1.3
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-upstream-fair
url: https://github.com/itoffshore/nginx-upstream-fair
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-upstream-fair-1.29.3+0.1.3-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-upstream-fair-debuginfo-1.29.3+0.1.3-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-upstream-fair.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 5a203ec8e5242def7873f25eab5fedb8aab2a693a1f0c807bc552e4d0e452cd9
name: nginx-module-upstream-jdomain
arch: x86_64
version: 1.29.3+1.5.2
epoch: 2
release: 1.fc43.gps
summary: Asynchronous domain name resolution module for NGINX upstream
url: https://github.com/nicholaschiasson/ngx_upstream_jdomain
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-upstream-jdomain-1.29.3+1.5.2-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-upstream-jdomain-1.29.3+1.5.2-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  Asynchronous domain name resolution module for NGINX upstream

  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_upstream_jdomain_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 178e8b5c67f779e3059fec465d76507e714c6ec82f00b4da1fa0fe5b6c27a4e4
name: nginx-module-upstream-jdomain-debuginfo
arch: x86_64
version: 1.29.3+1.5.2
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-upstream-jdomain
url: https://github.com/nicholaschiasson/ngx_upstream_jdomain
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-upstream-jdomain-1.29.3+1.5.2-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-upstream-jdomain-debuginfo-1.29.3+1.5.2-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-upstream-jdomain.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 36c0d6a850ccd1ee453566bfffed0702a99493305b6fdfdeb55b2dee58898aae
name: nginx-module-upsync
arch: x86_64
version: 1.29.3+2.1.3
epoch: 2
release: 1.fc43.gps
summary: NGINX module for syncing upstreams from consul or etcd
url: https://github.com/weibocom/nginx-upsync-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-upsync-1.29.3+2.1.3-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-upsync-1.29.3+2.1.3-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  Syncs upstreams from consul or others, dynamically modify backend-servers
  attribute(weight, max_fails,...), needn't reload nginx.

  It may not always be convenient to modify configuration files and restart
  NGINX. For example, if you are experiencing large amounts of traffic and high
  load, restarting NGINX and reloading the configuration at that point further
  increases load on the system and can temporarily degrade performance.

  The module can be more smoothly expansion and constriction, and will not
  influence the performance.

  Another module, nginx-module-stream-upsync supports nginx stream
  module(TCP protocol), please be noticed.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_upsync_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 136e2da5996c088c11853ab754f7ce0b3b2a2ceb9d1c0db4f6a2addac000afff
name: nginx-module-upsync-debuginfo
arch: x86_64
version: 1.29.3+2.1.3
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-upsync
url: https://github.com/weibocom/nginx-upsync-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-upsync-1.29.3+2.1.3-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-upsync-debuginfo-1.29.3+2.1.3-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-upsync.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 377dde4e5b1c2b32a8ad320c9fbd7edbbb65f6e39edfa5fd9693ed6d2e656bda
name: nginx-module-vts
arch: x86_64
version: 1.29.3+0.2.4
epoch: 2
release: 1.fc43.gps
summary: NGINX virtual host traffic status module
url: https://github.com/vozlt/nginx-module-vts
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-vts-1.29.3+0.2.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-vts-1.29.3+0.2.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This is an NGINX module that provides access to virtual host status
  information. It contains the current status such as servers,
  upstreams, caches.

  This is similar to the live activity monitoring of NGINX Plus


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_vhost_traffic_status_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 9f7775eeab12ed430b14204956ab79c20a317fdf14d18045c86d05bf3f6e7b07
name: nginx-module-vts-debuginfo
arch: x86_64
version: 1.29.3+0.2.4
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-vts
url: https://github.com/vozlt/nginx-module-vts
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-vts-1.29.3+0.2.4-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-vts-debuginfo-1.29.3+0.2.4-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-vts.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 88c8f8551501a1429f65dfefa32b60d3a1298d63b87f5ca5d6eadd5425812104
name: nginx-module-waf-debuginfo
arch: x86_64
version: 1.29.4+6.1.10
epoch: 0
release: 1.fc43.gps
summary: Debug information for package nginx-module-waf
url: https://github.com/ADD-SP/ngx_waf
rpm_license: BSD
rpm_vendor: GetPageSpeed, Inc.
rpm_group: Development/Debug
rpm_buildhost: c6d8d094043c
rpm_sourcerpm: nginx-module-waf-1.29.4+6.1.10-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-waf-debuginfo-1.29.4+6.1.10-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-waf.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 93c2faaa4848fba9c130665c7e2cf246a737d2468b6a8e0556d163d727d9be6d
name: nginx-module-webp
arch: x86_64
version: 1.29.3+0.1.1.5
epoch: 2
release: 1.fc43.gps
summary: NGINX WebP module
url: https://github.com/dvershinin/ngx_webp
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-webp-1.29.3+0.1.1.5-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-webp-1.29.3+0.1.1.5-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX module which converts jpg/png images on fly and sends webp response


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_webp_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: a225c621e3c70769d6ae85f950770fa24767eeff1db34f0be1051fd877db80d2
name: nginx-module-webp-debuginfo
arch: x86_64
version: 1.29.3+0.1.1.5
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-webp
url: https://github.com/dvershinin/ngx_webp
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-webp-1.29.3+0.1.1.5-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-webp-debuginfo-1.29.3+0.1.1.5-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-webp.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 8ca701a6dea5bd64fc21c9c08868bc882aad9127d51b0b00d08b898f728b01ae
name: nginx-module-xslt
arch: x86_64
version: 1.29.3
epoch: 2
release: 2.fc43.gps
summary: NGINX XSLT dynamic module
url: http://nginx.org/
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-xslt-1.29.3-2.fc43.gps.src.rpm
location_href: RPMS/nginx-module-xslt-1.29.3-2.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX XSLT dynamic module.
  This filter module transforms XML responses using one or more XSLT stylesheets.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_xslt_filter_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: bd981999fd2532cb37a68cfe5d816dce9641afb96dcdb568c883ebfde5528668
name: nginx-module-xslt-debuginfo
arch: x86_64
version: 1.29.3
epoch: 2
release: 2.fc43.gps
summary: Debug information for package nginx-module-xslt
url: http://nginx.org/
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-xslt-1.29.3-2.fc43.gps.src.rpm
location_href: RPMS/nginx-module-xslt-debuginfo-1.29.3-2.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-xslt.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: c5d9a9354df24b1d2f3379aee94273783b3dee8c22a45445f043152d2fc49487
name: nginx-module-xss
arch: x86_64
version: 1.29.3+0.6
epoch: 2
release: 1.fc43.gps
summary: Native cross-site scripting support in NGINX
url: https://github.com/dvershinin/xss-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-xss-1.29.3+0.6-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-xss-1.29.3+0.6-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This module adds cross-site AJAX support to NGINX.
  Currently only cross-site GET is supported.
  But cross-site POST will be added in the future.

  The cross-site GET is currently implemented as JSONP (or "JSON with padding").
  See http://en.wikipedia.org/wiki/JSON#JSONP for more details.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_xss_filter_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 66fed9c462f9bb839b6eb6ff4bc09cee83099baf48210d59fc61c6847eb94305
name: nginx-module-xss-debuginfo
arch: x86_64
version: 1.29.3+0.6
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-xss
url: https://github.com/dvershinin/xss-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-xss-1.29.3+0.6-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-xss-debuginfo-1.29.3+0.6-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-xss.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 4b7d2c014c9685c933f08cb7c479f905cdd929e7d83e47f52f576b91788c07f4
name: nginx-module-zip
arch: x86_64
version: 1.29.3+1.2.1
epoch: 2
release: 1.fc43.gps
summary: Streaming ZIP archiver for NGINX
url: https://github.com/dvershinin/mod_zip
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-zip-1.29.3+1.2.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-zip-1.29.3+1.2.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  mod_zip assembles ZIP archives dynamically. It can stream component
  files from upstream servers with nginx's native proxying code, so
  that the process never takes up more than a few KB of RAM at a time,
  even while assembling archives that are (potentially) gigabytes in
  size.

  mod_zip supports a number of "modern" ZIP features, including large
  files, UTC timestamps, and UTF-8 filenames. It allows clients to
  resume large downloads using the "Range" and "If-Range" headers,
  although these feature require the server to know the file checksums
  (CRC-32's) in advance. See "Usage" for details.

  To unzip files on the fly, check out nginx-module-unzip.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_zip_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 9774761af526558c150b69d004e02f8b640289b1cac9e2a5fe7c04523108aa98
name: nginx-module-zip-debuginfo
arch: x86_64
version: 1.29.3+1.2.1
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-zip
url: https://github.com/dvershinin/mod_zip
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-zip-1.29.3+1.2.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-zip-debuginfo-1.29.3+1.2.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-zip.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: b5691c0b73ef658b7d80cef890c2ef47ff27b7170d5a6171f6c1e0ce956517e0
name: nginx-module-zstd
arch: x86_64
version: 1.29.3+0.1.1
epoch: 2
release: 1.fc43.gps
summary: NGINX module for the Zstandard compression
url: https://github.com/tokers/zstd-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: System Environment/Daemons
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-zstd-1.29.3+0.1.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-zstd-1.29.3+0.1.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  NGINX module for the Zstandard compression.
  This NGINX module is currently considered experimental.


  To enable this module after installation, add the following to /etc/nginx/nginx.conf
  and reload NGINX:

      load_module modules/ngx_http_zstd_filter_module.so;
      load_module modules/ngx_http_zstd_static_module.so;


  Alternatively, you can enable all installed modules by placing this line at the top of /etc/nginx/nginx.conf:

      include /usr/share/nginx/modules/*.conf;


pkgId: 9b6c2894dce73a47664f9311f5f0c4f10d366db8c7d5e17e173dd665e429f422
name: nginx-module-zstd-debuginfo
arch: x86_64
version: 1.29.3+0.1.1
epoch: 2
release: 1.fc43.gps
summary: Debug information for package nginx-module-zstd
url: https://github.com/tokers/zstd-nginx-module
rpm_license: BSD
rpm_vendor: GetPageSpeed LLC
rpm_group: Development/Debug
rpm_buildhost: d98d0479979e
rpm_sourcerpm: nginx-module-zstd-1.29.3+0.1.1-1.fc43.gps.src.rpm
location_href: RPMS/nginx-module-zstd-debuginfo-1.29.3+0.1.1-1.fc43.gps.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nginx-module-zstd.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


