x86_64 GetPageSpeed extras (mainline) repository for Fedora Linux 44

Update: nginx-module-sorted-args-1.31.1+3.0.1-4.fc44.gps

Thu, 04 Jun 2026 10:49:37 +0000

Package: nginx-module-sorted-args
Summary: HTTP querystring parameters normalization for NGINX

Description:
Powerful NGINX module that normalizes HTTP request querystring parameters by sorting them alphanumerically. To enable this module after installation, add the following to /etc/nginx/nginx.conf and reload NGINX: load_module modules/ngx_http_sorted_args_module.so; Alternatively, enable all installed modules by adding this line to the top of /etc/nginx/nginx.conf: include /usr/share/nginx/modules/*.conf;

Changes:

nginx-module-sorted-args-1.31.1+3.0.1-4.fc44.gps.x86_64 [21 KiB]	(no changelog entry)
nginx-module-sorted-args-1.31.1+3.0.1-3.fc44.gps.x86_64 [21 KiB]	(no changelog entry)
nginx-module-sorted-args-1.31.1+3.0.1-2.fc44.gps.x86_64 [21 KiB]	(no changelog entry)
nginx-module-sorted-args-1.31.0+3.0.1-2.fc44.gps.x86_64 [21 KiB]	(no changelog entry)
nginx-module-sorted-args-1.31.0+3.0.1-1.fc44.gps.x86_64 [21 KiB]	(no changelog entry)
nginx-module-sorted-args-1.29.8+3.0.1-1.fc44.gps.x86_64 [21 KiB]	(no changelog entry)

Update: nginx-module-ipset-access-1.31.1+2.0.9-4.fc44.gps

Thu, 04 Jun 2026 10:48:57 +0000

Package: nginx-module-ipset-access
Summary: Zero-latency IP blocking using Linux kernel ipsets (v2)

Description:
High-performance NGINX module for IP-based access control using Linux kernel ipsets. Key Features: - Blacklist/Whitelist modes: Block or allow IPs based on ipset membership - Honeypot auto-add: Automatically add malicious IPs to ipsets with configurable timeouts and custom HTTP status codes - Built-in rate limiting: Per-IP rate limiting with auto-ban to ipsets - JavaScript challenges: Proof-of-work challenges to filter bots - Dual-stack support: Works with both IPv4 and IPv6 ipsets - FirewallD compatible: Integrates with firewall-cmd managed ipsets - Whitelist bypass: Whitelisted IPs skip rate limiting and challenges - Dry-run mode: Test rules in production without blocking - Prometheus metrics: Native /metrics endpoint for monitoring - LRU cache: Shared memory cache for high-performance lookups Uses libipset directly (no CLI fallback) for kernel-level performance. Compatible with realip module for proper client IP detection behind proxies. Note: This module requires CAP_NET_ADMIN capability. The selinux subpackage includes a systemd override and helper library to enable this automatically. To enable this module after installation, add the following to /etc/nginx/nginx.conf and reload NGINX: load_module modules/ngx_http_ipset_access_module.so; Alternatively, enable all installed modules by adding this line to the top of /etc/nginx/nginx.conf: include /usr/share/nginx/modules/*.conf;

Changes:

nginx-module-ipset-access-1.31.1+2.0.9-4.fc44.gps.x86_64 [38 KiB]	(no changelog entry)
nginx-module-ipset-access-1.31.1+2.0.9-3.fc44.gps.x86_64 [38 KiB]	(no changelog entry)
nginx-module-ipset-access-1.31.1+2.0.9-2.fc44.gps.x86_64 [38 KiB]	(no changelog entry)
nginx-module-ipset-access-1.31.0+2.0.9-2.fc44.gps.x86_64 [38 KiB]	(no changelog entry)
nginx-module-ipset-access-1.31.0+2.0.9-1.fc44.gps.x86_64 [38 KiB]	(no changelog entry)

Update: nginx-module-ipset-access-selinux-1.31.1+2.0.9-4.fc44.gps

Thu, 04 Jun 2026 10:48:57 +0000

Package: nginx-module-ipset-access-selinux
Summary: SELinux policy module required to run nginx-module-ipset-access

Description:
This package contains SELinux policy module necessary to run nginx-module-ipset-access. Additionally, it includes a capability helper that allows NGINX workers to retain CAP_NET_ADMIN after dropping privileges, and a systemd drop-in to automatically configure the required capabilities for the nginx service.

Changes:

nginx-module-ipset-access-selinux-1.31.1+2.0.9-4.fc44.gps.x86_64 [15 KiB]	(no changelog entry)
nginx-module-ipset-access-selinux-1.31.1+2.0.9-3.fc44.gps.x86_64 [15 KiB]	(no changelog entry)
nginx-module-ipset-access-selinux-1.31.1+2.0.9-2.fc44.gps.x86_64 [15 KiB]	(no changelog entry)
nginx-module-ipset-access-selinux-1.31.0+2.0.9-2.fc44.gps.x86_64 [15 KiB]	(no changelog entry)
nginx-module-ipset-access-selinux-1.31.0+2.0.9-1.fc44.gps.x86_64 [15 KiB]	(no changelog entry)

Update: nginx-module-nftset-access-1.31.1+3.0.0-4.fc44.gps

Thu, 04 Jun 2026 10:25:39 +0000

Package: nginx-module-nftset-access
Summary: Zero-latency IP blocking using Linux kernel nftables sets

Description:
High-performance NGINX module for IP-based access control using Linux kernel nftables sets. Key Features: - Blacklist/Whitelist modes: Block or allow IPs based on nftables set membership - Multiple sets: Check against multiple nft sets in one directive - Live updates: Modify nft sets without reloading NGINX - Honeypot auto-add: Automatically add malicious IPs to nftables sets with configurable timeouts - Built-in rate limiting: Per-IP rate limiting with auto-ban to nftables sets - JavaScript challenges: Proof-of-work challenges to filter bots - Dual-stack support: Works with both IPv4 and IPv6 nftables sets - Custom status codes: Return any HTTP status when blocking - CIDR support: Use interval sets for network ranges - Prometheus metrics: Native /metrics endpoint for monitoring - JSON stats API: Detailed statistics endpoint - LRU cache: Shared memory cache for high-performance lookups Successor to ipset-access module, using modern nftables instead of legacy ipset. Compatible with realip module for proper client IP detection behind proxies. Note: This module requires CAP_NET_ADMIN capability. The selinux subpackage includes a systemd override and helper library to enable this automatically. To enable this module after installation, add the following to /etc/nginx/nginx.conf and reload NGINX: load_module modules/ngx_http_nftset_access_module.so; Alternatively, enable all installed modules by adding this line to the top of /etc/nginx/nginx.conf: include /usr/share/nginx/modules/*.conf;

Changes:

nginx-module-nftset-access-1.31.1+3.0.0-4.fc44.gps.x86_64 [40 KiB]	(no changelog entry)
nginx-module-nftset-access-1.31.1+3.0.0-3.fc44.gps.x86_64 [40 KiB]	(no changelog entry)
nginx-module-nftset-access-1.31.1+3.0.0-2.fc44.gps.x86_64 [40 KiB]	(no changelog entry)
nginx-module-nftset-access-1.31.0+3.0.0-2.fc44.gps.x86_64 [40 KiB]	(no changelog entry)
nginx-module-nftset-access-1.31.0+3.0.0-1.fc44.gps.x86_64 [40 KiB]	(no changelog entry)

Update: nginx-module-nftset-access-selinux-1.31.1+3.0.0-4.fc44.gps

Thu, 04 Jun 2026 10:25:39 +0000

Package: nginx-module-nftset-access-selinux
Summary: SELinux policy module required to run nginx-module-nftset-access

Description:
This package contains SELinux policy module necessary to run nginx-module-nftset-access. Additionally, it includes a capability helper that allows NGINX workers to retain CAP_NET_ADMIN after dropping privileges, and a systemd drop-in to automatically configure the required capabilities for the nginx service.

Changes:

nginx-module-nftset-access-selinux-1.31.1+3.0.0-4.fc44.gps.x86_64 [15 KiB]	(no changelog entry)
nginx-module-nftset-access-selinux-1.31.1+3.0.0-3.fc44.gps.x86_64 [15 KiB]	(no changelog entry)
nginx-module-nftset-access-selinux-1.31.1+3.0.0-2.fc44.gps.x86_64 [15 KiB]	(no changelog entry)
nginx-module-nftset-access-selinux-1.31.0+3.0.0-2.fc44.gps.x86_64 [15 KiB]	(no changelog entry)
nginx-module-nftset-access-selinux-1.31.0+3.0.0-1.fc44.gps.x86_64 [15 KiB]	(no changelog entry)

Update: nginx-1.31.1-57.fc44.gps

Wed, 03 Jun 2026 01:31:30 +0000

Package: nginx
Summary: High performance web server

Description:
nginx [engine x] is an HTTP and reverse proxy server, as well as a mail proxy server.

Changes:

nginx-1.31.1-57.fc44.gps.x86_64 [1.2 MiB]	Changelog by Danila Vershinin (2026-05-31): - gps_license: bump to 1.2.0. Operator-facing 503s now point at /nginx-license-token/ on getpagespeed.com (revoked / missing / expired / invalid / unknown) and the 503 body is a centered nginx-style HTML page with a "Restore access" button. The bare URL keeps serving the generic page so older module versions still work.
nginx-1.31.1-56.fc44.gps.x86_64 [1.2 MiB]	Changelog by Danila Vershinin (2026-05-31): - gps_license: bump to 1.2.0. Operator-facing 503s now point at /nginx-license-token/ on getpagespeed.com (revoked / missing / expired / invalid / unknown) and the 503 body is a centered nginx-style HTML page with a "Restore access" button. The bare URL keeps serving the generic page so older module versions still work.
nginx-1.31.1-55.fc44.gps.x86_64 [1.2 MiB]	Changelog by Danila Vershinin (2026-05-25): - Recall the 2026-04-22 nginx-mod leak: Obsoletes nginx-mod = 3:1.30.0-44 so hosts that were silently swapped to that exact build during the main-channel slip self-heal back to stock nginx on `dnf upgrade`. Scoped to the one leaked NVR (no-op otherwise); no matching Provides (would trip the module Conflicts).
nginx-1.31.1-54.fc44.gps.x86_64 [1.2 MiB]	Changelog by Danila Vershinin (2026-05-18): - Bundle nginx-gps SELinux policy: allow outbound HTTPS from httpd_t (license reporting + future integrations) and bind UDP 443 for HTTP/3. Paired with `semanage port -a -t http_port_t -p udp 443` in %post for EL <= 9 where the UDP label is missing.
nginx-1.31.1-53.fc44.gps.x86_64 [1.2 MiB]	Changelog by Danila Vershinin (2026-05-18): - Bundle nginx-gps SELinux policy: allow outbound HTTPS from httpd_t (license reporting + future integrations) and bind UDP 443 for HTTP/3. Paired with `semanage port -a -t http_port_t -p udp 443` in %post for EL <= 9 where the UDP label is missing.
nginx-1.31.0-53.fc44.gps.x86_64 [1.2 MiB]	Changelog by Danila Vershinin (2026-05-18): - Bundle nginx-gps SELinux policy: allow outbound HTTPS from httpd_t (license reporting + future integrations) and bind UDP 443 for HTTP/3. Paired with `semanage port -a -t http_port_t -p udp 443` in %post for EL <= 9 where the UDP label is missing.
nginx-1.31.0-52.fc44.gps.x86_64 [1.2 MiB]	Changelog by Danila Vershinin (2026-05-05): - gps_license: bump to 1.1.1 (host telemetry: distro/arch/package_source). - gps_license: enable on RHEL >= 8 and Amazon Linux >= 2 (was Fedora / SUSE / EL7 only). Pass package_source=nginx_rpm via cc_opt.
nginx-1.31.0-51.fc44.gps.x86_64 [1.2 MiB]	Changelog by Danila Vershinin (2026-05-05): - gps_license: bump to 1.1.1 (host telemetry: distro/arch/package_source). - gps_license: enable on RHEL >= 8 and Amazon Linux >= 2 (was Fedora / SUSE / EL7 only). Pass package_source=nginx_rpm via cc_opt.
nginx-1.29.8-51.fc44.gps.x86_64 [1.2 MiB]	Changelog by Danila Vershinin (2026-05-05): - gps_license: bump to 1.1.1 (host telemetry: distro/arch/package_source). - gps_license: enable on RHEL >= 8 and Amazon Linux >= 2 (was Fedora / SUSE / EL7 only). Pass package_source=nginx_rpm via cc_opt.
nginx-1.29.8-50.fc44.gps.x86_64 [1.2 MiB]	Changelog by Danila Vershinin (2026-04-19): - Preserve cross-variant nginx service enabled/active state across upgrades (scan nginx.service and angie.service in %pretrans, restore in %posttrans)

Update: nginx-module-media-framework-1.31.1+2.0.6-7.fc44.gps

Sun, 24 May 2026 02:27:55 +0000

Package: nginx-module-media-framework
Summary: Kaltura Live Media Framework

Description:
A distributed framework for live video streaming. The system is composed of multiple components, each one responsible for a specific function. Enable modules by placing at the top of your /etc/nginx/nginx.conf file: load_module modules/ngx_http_api_module.so; load_module modules/ngx_http_pckg_core_module.so; load_module modules/ngx_kmp_in_module.so; load_module modules/ngx_kmp_out_module.so; load_module modules/ngx_live_module.so; load_module modules/ngx_rtmp_kmp_module.so; load_module modules/ngx_rtmp_module.so; load_module modules/ngx_stream_kmp_cc_module.so; load_module modules/ngx_stream_kmp_rtmp_module.so; load_module modules/ngx_stream_ts_module.so; load_module modules/ngx_ts_kmp_module.so;

Changes:

nginx-module-media-framework-1.31.1+2.0.6-7.fc44.gps.x86_64 [491 KiB]

Changelog by Danila Vershinin (2026-03-12):

- Fix SIGSEGV at worker startup caused by -DNGX_COMPILER=__GNUC__ in CC_OPT.
  __GNUC__ is a preprocessor integer (e.g. 14), not a string. Kaltura's
  ngx_http_live_api_module.c uses ngx_json_string(NGX_COMPILER) which expands
  via ngx_string() to { sizeof(NGX_COMPILER)-1, (u_char*)NGX_COMPILER }.
  With NGX_COMPILER=14, this became { 1, (u_char*)0xe } — a bogus pointer
  that crashed in ngx_escape_json() during worker init_process.
  The -D also shadowed nginx's own correct "#define NGX_COMPILER "gcc X.Y.Z""
  in ngx_auto_config.h because auto/define uses an #ifndef guard.
  Fix: remove the -D entirely and let nginx's auto/cc/name handle it.

nginx-module-media-framework-1.31.1+2.0.6-6.fc44.gps.x86_64 [491 KiB]

Changelog by Danila Vershinin (2026-03-12):

- Fix SIGSEGV at worker startup caused by -DNGX_COMPILER=__GNUC__ in CC_OPT.
  __GNUC__ is a preprocessor integer (e.g. 14), not a string. Kaltura's
  ngx_http_live_api_module.c uses ngx_json_string(NGX_COMPILER) which expands
  via ngx_string() to { sizeof(NGX_COMPILER)-1, (u_char*)NGX_COMPILER }.
  With NGX_COMPILER=14, this became { 1, (u_char*)0xe } — a bogus pointer
  that crashed in ngx_escape_json() during worker init_process.
  The -D also shadowed nginx's own correct "#define NGX_COMPILER "gcc X.Y.Z""
  in ngx_auto_config.h because auto/define uses an #ifndef guard.
  Fix: remove the -D entirely and let nginx's auto/cc/name handle it.

nginx-module-media-framework-1.31.0+2.0.6-6.fc44.gps.x86_64 [492 KiB]

Changelog by Danila Vershinin (2026-03-12):

- Fix SIGSEGV at worker startup caused by -DNGX_COMPILER=__GNUC__ in CC_OPT.
  __GNUC__ is a preprocessor integer (e.g. 14), not a string. Kaltura's
  ngx_http_live_api_module.c uses ngx_json_string(NGX_COMPILER) which expands
  via ngx_string() to { sizeof(NGX_COMPILER)-1, (u_char*)NGX_COMPILER }.
  With NGX_COMPILER=14, this became { 1, (u_char*)0xe } — a bogus pointer
  that crashed in ngx_escape_json() during worker init_process.
  The -D also shadowed nginx's own correct "#define NGX_COMPILER "gcc X.Y.Z""
  in ngx_auto_config.h because auto/define uses an #ifndef guard.
  Fix: remove the -D entirely and let nginx's auto/cc/name handle it.

Update: nginx-module-stream-lua-1.31.1.0.0.9-5.fc44.gps

Sun, 24 May 2026 02:27:47 +0000

Package: nginx-module-stream-lua
Summary: NGINX module for Lua support

Description:
Embed the Power of Lua into NGINX HTTP servers. This RPM was obtained from extras.getpagespeed.com

Changes:

nginx-module-stream-lua-1.31.1.0.0.9-5.fc44.gps.x86_64 [209 KiB]	Changelog by Danila Vershinin (2026-05-23): - Retire the legacy nginx-mod-module-stream-lua name: drop the _nginx_mod build path so only stock nginx-module-stream-lua is produced. Bump Epoch to 5 (uniform across all distros; was per-distro and absent on el9) to win over and obsolete the retired mod package (live as high as epoch 4 on el7), migrating customers off
nginx-module-stream-lua-1.31.1.0.0.9-4.fc44.gps.x86_64 [209 KiB]	Changelog by Danila Vershinin (2026-05-23): - Retire the legacy nginx-mod-module-stream-lua name: drop the _nginx_mod build path so only stock nginx-module-stream-lua is produced. Bump Epoch to 5 (uniform across all distros; was per-distro and absent on el9) to win over and obsolete the retired mod package (live as high as epoch 4 on el7), migrating customers off
nginx-module-stream-lua-1.31.1.0.0.9-3.fc44.gps.x86_64 [209 KiB]	Changelog by Danila Vershinin (2026-03-27): - Updated to upstream module version 0.0.18 (from GetPageSpeed fork) - Fixes lua-resty-core 0.1.32+ compatibility (ngx_stream_lua_ffi_socket_tcp_getfd) - Removed fix-ifnamsiz-el7.patch (merged upstream)
nginx-module-stream-lua-1.31.0.0.0.9-3.fc44.gps.x86_64 [209 KiB]	Changelog by Danila Vershinin (2026-03-27): - Updated to upstream module version 0.0.18 (from GetPageSpeed fork) - Fixes lua-resty-core 0.1.32+ compatibility (ngx_stream_lua_ffi_socket_tcp_getfd) - Removed fix-ifnamsiz-el7.patch (merged upstream)
nginx-module-stream-lua-1.31.0.0.0.9-2.fc44.gps.x86_64 [209 KiB]	Changelog by Danila Vershinin (2026-03-27): - Updated to upstream module version 0.0.18 (from GetPageSpeed fork) - Fixes lua-resty-core 0.1.32+ compatibility (ngx_stream_lua_ffi_socket_tcp_getfd) - Removed fix-ifnamsiz-el7.patch (merged upstream)
nginx-module-stream-lua-1.31.0.0.0.9-1.fc44.gps.x86_64 [209 KiB]	Changelog by Danila Vershinin (2026-03-27): - Updated to upstream module version 0.0.18 (from GetPageSpeed fork) - Fixes lua-resty-core 0.1.32+ compatibility (ngx_stream_lua_ffi_socket_tcp_getfd) - Removed fix-ifnamsiz-el7.patch (merged upstream)
nginx-module-stream-lua-1.29.8.0.0.9-1.fc44.gps.x86_64 [209 KiB]	Changelog by Danila Vershinin (2026-03-27): - Updated to upstream module version 0.0.18 (from GetPageSpeed fork) - Fixes lua-resty-core 0.1.32+ compatibility (ngx_stream_lua_ffi_socket_tcp_getfd) - Removed fix-ifnamsiz-el7.patch (merged upstream)

Update: nginx-module-waf-1.31.1+6.1.10-2.fc44.gps

Sun, 24 May 2026 02:27:09 +0000

Package: nginx-module-waf
Summary: Firewall module for NGINX

Description:
A web application firewall module for nginx

Changes:

nginx-module-waf-1.31.1+6.1.10-2.fc44.gps.x86_64 [56 KiB]	Changelog by Danila Vershinin (2025-01-26): - Carefully updated to upstream module version 6.1.10
nginx-module-waf-1.31.1+6.1.10-1.fc44.gps.x86_64 [56 KiB]	Changelog by Danila Vershinin (2025-01-26): - Carefully updated to upstream module version 6.1.10
nginx-module-waf-1.31.0+6.1.10-1.fc44.gps.x86_64 [56 KiB]	Changelog by Danila Vershinin (2025-01-26): - Carefully updated to upstream module version 6.1.10

Update: nginx-module-pagespeed-1.31.1+1.14.36.2-70.fc44.gps

Sun, 24 May 2026 02:27:07 +0000

Package: nginx-module-pagespeed
Summary: PageSpeed dynamic module for NGINX

Description:
PageSpeed dynamic module for nginx.

Changes:

nginx-module-pagespeed-1.31.1+1.14.36.2-70.fc44.gps.x86_64 [8.5 MiB]	Changelog by Danila Vershinin (2022-07-19): - removed selinux-policy strict version dependency as it breaks package installation across various - non-binary compatible distros like Oracle Linux
nginx-module-pagespeed-1.31.1+1.14.36.2-69.fc44.gps.x86_64 [8.5 MiB]	Changelog by Danila Vershinin (2022-07-19): - removed selinux-policy strict version dependency as it breaks package installation across various - non-binary compatible distros like Oracle Linux
nginx-module-pagespeed-1.31.0+1.14.36.2-69.fc44.gps.x86_64 [8.5 MiB]	Changelog by Danila Vershinin (2022-07-19): - removed selinux-policy strict version dependency as it breaks package installation across various - non-binary compatible distros like Oracle Linux
nginx-module-pagespeed-1.29.8+1.14.36.2-69.fc44.gps.x86_64 [8.5 MiB]	Changelog by Danila Vershinin (2022-07-19): - removed selinux-policy strict version dependency as it breaks package installation across various - non-binary compatible distros like Oracle Linux

Update: nginx-module-pagespeed-selinux-1.31.1+1.14.36.2-70.fc44.gps

Sun, 24 May 2026 02:27:07 +0000

Package: nginx-module-pagespeed-selinux
Summary: SELinux policy module required to run NGINX PageSpeed module

Description:
This package contains SELinux policy module necessary to run NGINX PageSpeed module.

Changes:

nginx-module-pagespeed-selinux-1.31.1+1.14.36.2-70.fc44.gps.x86_64 [11 KiB]	Changelog by Danila Vershinin (2022-07-19): - removed selinux-policy strict version dependency as it breaks package installation across various - non-binary compatible distros like Oracle Linux
nginx-module-pagespeed-selinux-1.31.1+1.14.36.2-69.fc44.gps.x86_64 [11 KiB]	Changelog by Danila Vershinin (2022-07-19): - removed selinux-policy strict version dependency as it breaks package installation across various - non-binary compatible distros like Oracle Linux
nginx-module-pagespeed-selinux-1.31.0+1.14.36.2-69.fc44.gps.x86_64 [11 KiB]	Changelog by Danila Vershinin (2022-07-19): - removed selinux-policy strict version dependency as it breaks package installation across various - non-binary compatible distros like Oracle Linux
nginx-module-pagespeed-selinux-1.29.8+1.14.36.2-69.fc44.gps.x86_64 [11 KiB]	Changelog by Danila Vershinin (2022-07-19): - removed selinux-policy strict version dependency as it breaks package installation across various - non-binary compatible distros like Oracle Linux

Update: nginx-module-brotli-1.31.1+0.1.4-4.fc44.gps

Sun, 24 May 2026 02:26:54 +0000

Package: nginx-module-brotli
Summary: NGINX Brotli dynamic modules

Description:
NGINX Brotli dynamic modules

Changes:

nginx-module-brotli-1.31.1+0.1.4-4.fc44.gps.x86_64 [25 KiB]	Changelog by Danila Vershinin (2021-07-01): - upstream module version auto-updated to 0.1.4
nginx-module-brotli-1.31.1+0.1.4-3.fc44.gps.x86_64 [25 KiB]	Changelog by Danila Vershinin (2021-07-01): - upstream module version auto-updated to 0.1.4
nginx-module-brotli-1.31.0+0.1.4-3.fc44.gps.x86_64 [25 KiB]	Changelog by Danila Vershinin (2021-07-01): - upstream module version auto-updated to 0.1.4

Update: nginx-module-security-1.31.1+1.0.4-15.fc44.gps

Sun, 24 May 2026 02:26:31 +0000

Package: nginx-module-security
Summary: NGINX Security dynamic module

Description:
NGINX Security module (ModSecurity). This module links with the new libmodsecurity library.

Changes:

nginx-module-security-1.31.1+1.0.4-15.fc44.gps.x86_64 [33 KiB]	Changelog by Danila Vershinin (2025-05-22): - Carefully updated to upstream module version 1.0.4
nginx-module-security-1.31.1+1.0.4-14.fc44.gps.x86_64 [33 KiB]	Changelog by Danila Vershinin (2025-05-22): - Carefully updated to upstream module version 1.0.4
nginx-module-security-1.31.0+1.0.4-14.fc44.gps.x86_64 [33 KiB]	Changelog by Danila Vershinin (2025-05-22): - Carefully updated to upstream module version 1.0.4
nginx-module-security-1.29.8+1.0.4-14.fc44.gps.x86_64 [33 KiB]	Changelog by Danila Vershinin (2025-05-22): - Carefully updated to upstream module version 1.0.4

Update: nginx-module-security-selinux-1.31.1+1.0.4-15.fc44.gps

Sun, 24 May 2026 02:26:31 +0000

Package: nginx-module-security-selinux
Summary: SELinux policy module required to run NGINX Security module

Description:
This package contains SELinux policy module necessary to run NGINX Security module.

Changes:

nginx-module-security-selinux-1.31.1+1.0.4-15.fc44.gps.x86_64 [10 KiB]	Changelog by Danila Vershinin (2025-05-22): - Carefully updated to upstream module version 1.0.4
nginx-module-security-selinux-1.31.1+1.0.4-14.fc44.gps.x86_64 [10 KiB]	Changelog by Danila Vershinin (2025-05-22): - Carefully updated to upstream module version 1.0.4
nginx-module-security-selinux-1.31.0+1.0.4-14.fc44.gps.x86_64 [10 KiB]	Changelog by Danila Vershinin (2025-05-22): - Carefully updated to upstream module version 1.0.4
nginx-module-security-selinux-1.29.8+1.0.4-14.fc44.gps.x86_64 [10 KiB]	Changelog by Danila Vershinin (2025-05-22): - Carefully updated to upstream module version 1.0.4

Update: nginx-module-lua-1.31.1+0.10.29+0.3.4-4.fc44.gps

Sun, 24 May 2026 01:10:25 +0000

Package: nginx-module-lua
Summary: NGINX module for Lua support

Description:
Embed the Power of Lua into NGINX HTTP servers. This RPM was obtained from extras.getpagespeed.com

Changes:

nginx-module-lua-1.31.1+0.10.29+0.3.4-4.fc44.gps.x86_64 [338 KiB]	Changelog by Danila Vershinin (2026-05-23): - Retire the legacy nginx-mod-module-lua name: drop the _nginx_mod build path so only stock nginx-module-lua is produced. Fixes the yum upgrade ping-pong caused by the mod package's unversioned Obsoletes: nginx-module-lua (now one-directional)
nginx-module-lua-1.31.1+0.10.29+0.3.4-3.fc44.gps.x86_64 [338 KiB]	Changelog by Danila Vershinin (2025-10-30): - Carefully updated to upstream module version 0.10.29
nginx-module-lua-1.31.0+0.10.29+0.3.4-3.fc44.gps.x86_64 [338 KiB]	Changelog by Danila Vershinin (2025-10-30): - Carefully updated to upstream module version 0.10.29
nginx-module-lua-1.31.0+0.10.29+0.3.4-1.fc44.gps.x86_64 [338 KiB]	Changelog by Danila Vershinin (2025-10-30): - Carefully updated to upstream module version 0.10.29

Update: nginx-module-zstd-1.31.1+0.1.1-2.fc44.gps

Sat, 23 May 2026 03:29:53 +0000

Package: nginx-module-zstd
Summary: NGINX module for the Zstandard compression

Description:
NGINX module for the Zstandard compression. This NGINX module is currently considered experimental. To enable this module after installation, add the following to /etc/nginx/nginx.conf and reload NGINX: load_module modules/ngx_http_zstd_filter_module.so; load_module modules/ngx_http_zstd_static_module.so; Alternatively, enable all installed modules by adding this line to the top of /etc/nginx/nginx.conf: include /usr/share/nginx/modules/*.conf;

Changes:

nginx-module-zstd-1.31.1+0.1.1-2.fc44.gps.x86_64 [30 KiB]	(no changelog entry)
nginx-module-zstd-1.31.0+0.1.1-2.fc44.gps.x86_64 [30 KiB]	(no changelog entry)
nginx-module-zstd-1.31.0+0.1.1-1.fc44.gps.x86_64 [30 KiB]	(no changelog entry)

Update: nginx-module-zip-1.31.1+1.3.0-2.fc44.gps

Sat, 23 May 2026 03:29:21 +0000

Package: nginx-module-zip
Summary: Streaming ZIP archiver for NGINX

Description:
NGINZ zip module assembles ZIP archives dynamically. It can stream component files from upstream servers with nginx's native proxying code, so that the process never takes up more than a few KB of RAM at a time, even while assembling archives that are (potentially) gigabytes in size. mod_zip supports a number of "modern" ZIP features, including large files, UTC timestamps, and UTF-8 filenames. It allows clients to resume large downloads using the "Range" and "If-Range" headers, although these feature require the server to know the file checksums (CRC-32's) in advance. See "Usage" for details. To unzip files on the fly, check out nginx-module-unzip. To enable this module after installation, add the following to /etc/nginx/nginx.conf and reload NGINX: load_module modules/ngx_http_zip_module.so; Alternatively, enable all installed modules by adding this line to the top of /etc/nginx/nginx.conf: include /usr/share/nginx/modules/*.conf;

Changes:

nginx-module-zip-1.31.1+1.3.0-2.fc44.gps.x86_64 [33 KiB]	(no changelog entry)
nginx-module-zip-1.31.0+1.3.0-2.fc44.gps.x86_64 [33 KiB]	(no changelog entry)
nginx-module-zip-1.31.0+1.3.0-1.fc44.gps.x86_64 [33 KiB]	(no changelog entry)

Update: nginx-module-xss-1.31.1+0.6-2.fc44.gps

Sat, 23 May 2026 03:28:52 +0000

Package: nginx-module-xss
Summary: Native cross-site scripting support in NGINX

Description:
This module adds cross-site AJAX support to NGINX. Currently only cross-site GET is supported. But cross-site POST will be added in the future. The cross-site GET is currently implemented as JSONP (or "JSON with padding"). See http://en.wikipedia.org/wiki/JSON#JSONP for more details. To enable this module after installation, add the following to /etc/nginx/nginx.conf and reload NGINX: load_module modules/ngx_http_xss_filter_module.so; Alternatively, enable all installed modules by adding this line to the top of /etc/nginx/nginx.conf: include /usr/share/nginx/modules/*.conf;

Changes:

nginx-module-xss-1.31.1+0.6-2.fc44.gps.x86_64 [20 KiB]	(no changelog entry)
nginx-module-xss-1.31.0+0.6-2.fc44.gps.x86_64 [20 KiB]	(no changelog entry)
nginx-module-xss-1.31.0+0.6-1.fc44.gps.x86_64 [20 KiB]	(no changelog entry)

Update: nginx-module-xslt-1.31.1-3.fc44.gps

Sat, 23 May 2026 03:28:24 +0000

Package: nginx-module-xslt
Summary: NGINX XSLT dynamic module

Description:
NGINX XSLT dynamic module. This filter module transforms XML responses using one or more XSLT stylesheets. To enable this module after installation, add the following to /etc/nginx/nginx.conf and reload NGINX: load_module modules/ngx_http_xslt_filter_module.so; Alternatively, enable all installed modules by adding this line to the top of /etc/nginx/nginx.conf: include /usr/share/nginx/modules/*.conf;

Changes:

nginx-module-xslt-1.31.1-3.fc44.gps.x86_64 [23 KiB]	(no changelog entry)
nginx-module-xslt-1.31.0-3.fc44.gps.x86_64 [23 KiB]	(no changelog entry)
nginx-module-xslt-1.31.0-2.fc44.gps.x86_64 [23 KiB]	(no changelog entry)

Update: nginx-module-webp-1.31.1+0.1.1.5-3.fc44.gps

Sat, 23 May 2026 03:27:57 +0000

Package: nginx-module-webp
Summary: NGINX WebP module

Description:
NGINX module which converts jpg/png images on fly and sends webp response To enable this module after installation, add the following to /etc/nginx/nginx.conf and reload NGINX: load_module modules/ngx_http_webp_module.so; Alternatively, enable all installed modules by adding this line to the top of /etc/nginx/nginx.conf: include /usr/share/nginx/modules/*.conf;

Changes:

nginx-module-webp-1.31.1+0.1.1.5-3.fc44.gps.x86_64 [18 KiB]	(no changelog entry)
nginx-module-webp-1.31.0+0.1.1.5-3.fc44.gps.x86_64 [18 KiB]	(no changelog entry)
nginx-module-webp-1.31.0+0.1.1.5-2.fc44.gps.x86_64 [18 KiB]	(no changelog entry)

Update: nginx-module-wasm-wasmtime-1.31.1+0.5.0-2.fc44.gps

Sat, 23 May 2026 03:27:12 +0000

Package: nginx-module-wasm-wasmtime
Summary: Proxy-Wasm support for Nginx powered by wasmtime

Description:
Proxy-Wasm (WebAssembly) support for Nginx powered by wasmtime To enable this module after installation, add the following to /etc/nginx/nginx.conf and reload NGINX: load_module modules/ngx_wasmx_module.so; Alternatively, enable all installed modules by adding this line to the top of /etc/nginx/nginx.conf: include /usr/share/nginx/modules/*.conf;

Changes:

nginx-module-wasm-wasmtime-1.31.1+0.5.0-2.fc44.gps.x86_64 [177 KiB]	(no changelog entry)
nginx-module-wasm-wasmtime-1.31.0+0.5.0-2.fc44.gps.x86_64 [177 KiB]	(no changelog entry)
nginx-module-wasm-wasmtime-1.31.0+0.5.0-1.fc44.gps.x86_64 [177 KiB]	(no changelog entry)

Update: nginx-module-vts-1.31.1+0.2.5-2.fc44.gps

Sat, 23 May 2026 03:26:30 +0000

Package: nginx-module-vts
Summary: NGINX virtual host traffic status module

Description:
This is an NGINX module that provides access to virtual host status information. It contains the current status such as servers, upstreams, caches. This is similar to the live activity monitoring of NGINX Plus To enable this module after installation, add the following to /etc/nginx/nginx.conf and reload NGINX: load_module modules/ngx_http_vhost_traffic_status_module.so; Alternatively, enable all installed modules by adding this line to the top of /etc/nginx/nginx.conf: include /usr/share/nginx/modules/*.conf;

Changes:

nginx-module-vts-1.31.1+0.2.5-2.fc44.gps.x86_64 [100 KiB]	(no changelog entry)
nginx-module-vts-1.31.0+0.2.5-2.fc44.gps.x86_64 [100 KiB]	(no changelog entry)
nginx-module-vts-1.31.0+0.2.5-1.fc44.gps.x86_64 [100 KiB]	(no changelog entry)

Update: nginx-module-vod-1.31.1+1.33-3.fc44.gps

Sat, 23 May 2026 03:25:18 +0000

Package: nginx-module-vod
Summary: NGINX-based VOD Packager

Description:
On-the-fly repackaging of MP4 files to DASH, HDS, HLS, MSS. To enable this module after installation, add the following to /etc/nginx/nginx.conf and reload NGINX: load_module modules/ngx_http_vod_module.so; Alternatively, enable all installed modules by adding this line to the top of /etc/nginx/nginx.conf: include /usr/share/nginx/modules/*.conf;

Changes:

nginx-module-vod-1.31.1+1.33-3.fc44.gps.x86_64 [406 KiB]	(no changelog entry)
nginx-module-vod-1.31.0+1.33-3.fc44.gps.x86_64 [406 KiB]	(no changelog entry)
nginx-module-vod-1.31.0+1.33-2.fc44.gps.x86_64 [406 KiB]	(no changelog entry)

Update: nginx-module-var-1.31.1+0.1.3-2.fc44.gps

Sat, 23 May 2026 03:24:46 +0000

Package: nginx-module-var
Summary: Dynamic variable assignment through predefined functions

Description:
The var module dynamically assigns new variables through predefined functions for NGINX. It provides operators like get_arg and get_upstream_cookie to retrieve argument and upstream set-cookie values. This is useful for complex configuration scenarios where you need to compute or extract variable values. To enable this module after installation, add the following to /etc/nginx/nginx.conf and reload NGINX: load_module modules/ngx_http_var_module.so; Alternatively, enable all installed modules by adding this line to the top of /etc/nginx/nginx.conf: include /usr/share/nginx/modules/*.conf;

Changes:

nginx-module-var-1.31.1+0.1.3-2.fc44.gps.x86_64 [44 KiB]	(no changelog entry)
nginx-module-var-1.31.0+0.1.3-2.fc44.gps.x86_64 [44 KiB]	(no changelog entry)
nginx-module-var-1.31.0+0.1.3-1.fc44.gps.x86_64 [44 KiB]	(no changelog entry)

Update: nginx-module-upsync-1.31.1+2.1.3-2.fc44.gps

Sat, 23 May 2026 03:24:13 +0000

Package: nginx-module-upsync
Summary: NGINX module for syncing upstreams from consul or etcd

Description:
Syncs upstreams from consul or others, dynamically modify backend-servers attribute(weight, max_fails,...), needn't reload nginx. It may not always be convenient to modify configuration files and restart NGINX. For example, if you are experiencing large amounts of traffic and high load, restarting NGINX and reloading the configuration at that point further increases load on the system and can temporarily degrade performance. The module can be more smoothly expansion and constriction, and will not influence the performance. Another module, nginx-module-stream-upsync supports nginx stream module(TCP protocol), please be noticed. To enable this module after installation, add the following to /etc/nginx/nginx.conf and reload NGINX: load_module modules/ngx_http_upsync_module.so; Alternatively, enable all installed modules by adding this line to the top of /etc/nginx/nginx.conf: include /usr/share/nginx/modules/*.conf;

Changes:

nginx-module-upsync-1.31.1+2.1.3-2.fc44.gps.x86_64 [66 KiB]	(no changelog entry)
nginx-module-upsync-1.31.0+2.1.3-2.fc44.gps.x86_64 [66 KiB]	(no changelog entry)
nginx-module-upsync-1.31.0+2.1.3-1.fc44.gps.x86_64 [66 KiB]	(no changelog entry)

Update: nginx-module-upstream-log-1.31.1+0.1.1-2.fc44.gps

Sat, 23 May 2026 03:23:45 +0000

Package: nginx-module-upstream-log
Summary: Writes upstream request logs in a specified format

Description:
The upstream log module writes upstream request logs in the specified format, similar to ngx_http_log_module but specifically for upstream requests. This allows separate logging of upstream/backend traffic for debugging and analytics purposes. To enable this module after installation, add the following to /etc/nginx/nginx.conf and reload NGINX: load_module modules/ngx_http_upstream_log_module.so; Alternatively, enable all installed modules by adding this line to the top of /etc/nginx/nginx.conf: include /usr/share/nginx/modules/*.conf;

Changes:

nginx-module-upstream-log-1.31.1+0.1.1-2.fc44.gps.x86_64 [25 KiB]	(no changelog entry)
nginx-module-upstream-log-1.31.0+0.1.1-2.fc44.gps.x86_64 [25 KiB]	(no changelog entry)
nginx-module-upstream-log-1.31.0+0.1.1-1.fc44.gps.x86_64 [25 KiB]	(no changelog entry)

Update: nginx-module-upstream-jdomain-1.31.1+1.5.2-2.fc44.gps

Sat, 23 May 2026 03:23:16 +0000

Package: nginx-module-upstream-jdomain
Summary: Asynchronous domain name resolution module for NGINX upstream

Description:
Asynchronous domain name resolution module for NGINX upstream To enable this module after installation, add the following to /etc/nginx/nginx.conf and reload NGINX: load_module modules/ngx_http_upstream_jdomain_module.so; Alternatively, enable all installed modules by adding this line to the top of /etc/nginx/nginx.conf: include /usr/share/nginx/modules/*.conf;

Changes:

nginx-module-upstream-jdomain-1.31.1+1.5.2-2.fc44.gps.x86_64 [24 KiB]	(no changelog entry)
nginx-module-upstream-jdomain-1.31.0+1.5.2-2.fc44.gps.x86_64 [24 KiB]	(no changelog entry)
nginx-module-upstream-jdomain-1.31.0+1.5.2-1.fc44.gps.x86_64 [24 KiB]	(no changelog entry)

Update: nginx-module-upstream-fair-1.31.1+0.1.3-2.fc44.gps

Sat, 23 May 2026 03:22:48 +0000

Package: nginx-module-upstream-fair
Summary: The fair load balancer module for NGINX

Description:
The fair load balancer module for NGINX To enable this module after installation, add the following to /etc/nginx/nginx.conf and reload NGINX: load_module modules/ngx_http_upstream_fair_module.so; Alternatively, enable all installed modules by adding this line to the top of /etc/nginx/nginx.conf: include /usr/share/nginx/modules/*.conf;

Changes:

nginx-module-upstream-fair-1.31.1+0.1.3-2.fc44.gps.x86_64 [23 KiB]	(no changelog entry)
nginx-module-upstream-fair-1.31.0+0.1.3-2.fc44.gps.x86_64 [23 KiB]	(no changelog entry)
nginx-module-upstream-fair-1.31.0+0.1.3-1.fc44.gps.x86_64 [23 KiB]	(no changelog entry)

Update: nginx-module-upload-1.31.1+2.3.0-2.fc44.gps

Sat, 23 May 2026 03:22:17 +0000

Package: nginx-module-upload
Summary: NGINX module for handling file uploads

Description:
A module for NGINX for handling file uploads using multipart/form-data encoding (RFC 1867) and resumable uploads according to this protocol. To enable this module after installation, add the following to /etc/nginx/nginx.conf and reload NGINX: load_module modules/ngx_http_upload_module.so; Alternatively, enable all installed modules by adding this line to the top of /etc/nginx/nginx.conf: include /usr/share/nginx/modules/*.conf;

Changes:

nginx-module-upload-1.31.1+2.3.0-2.fc44.gps.x86_64 [45 KiB]	(no changelog entry)
nginx-module-upload-1.31.0+2.3.0-2.fc44.gps.x86_64 [45 KiB]	(no changelog entry)
nginx-module-upload-1.31.0+2.3.0-1.fc44.gps.x86_64 [45 KiB]	(no changelog entry)

Update: nginx-module-upload-progress-1.31.1+0.9.4-3.fc44.gps

Sat, 23 May 2026 03:21:48 +0000

Package: nginx-module-upload-progress
Summary: NGINX upload progress tracking module

Description:
A module for NGINX implementing an upload progress system that monitors RFC1867 POST uploads as they are transmitted to upstream servers. This module reports upload progress to the client via a JSON response, allowing web applications to display progress bars during file uploads. To enable this module after installation, add the following to /etc/nginx/nginx.conf and reload NGINX: load_module modules/ngx_http_uploadprogress_module.so; Alternatively, enable all installed modules by adding this line to the top of /etc/nginx/nginx.conf: include /usr/share/nginx/modules/*.conf;

Changes:

nginx-module-upload-progress-1.31.1+0.9.4-3.fc44.gps.x86_64 [33 KiB]	(no changelog entry)
nginx-module-upload-progress-1.31.0+0.9.4-3.fc44.gps.x86_64 [33 KiB]	(no changelog entry)
nginx-module-upload-progress-1.31.0+0.9.4-2.fc44.gps.x86_64 [33 KiB]	(no changelog entry)