x86_64 GetPageSpeed extras repository for CentOS/RHEL 9

Update: sw-nginx-module-unbrotli-1.30.6+0.0.3-4.el9.pl18.gps

Fri, 30 Oct 2026 03:36:47 +0000

Package: sw-nginx-module-unbrotli
Summary: Decompresses Brotli-encoded responses for clients that do not support it

Description:
The ngx_unbrotli module is a filter that decompresses responses with Content-Encoding: br for clients that do not support Brotli encoding method. It allows to save I/O by unconditional Brotli compression of responses. After installation, enable this module by running: plesk sbin nginx_modules_ctl --enable unbrotli

Changes:

sw-nginx-module-unbrotli-1.30.6+0.0.3-4.el9.pl18.gps.x86_64 [20 KiB]	(no changelog entry)
sw-nginx-module-unbrotli-1.30.6+0.0.2-4.el9.pl18.gps.x86_64 [20 KiB]	(no changelog entry)

Update: sw-nginx-module-rtmp-1.30.6+1.2.2-8.el9.pl18.gps

Thu, 29 Oct 2026 20:56:52 +0000

Package: sw-nginx-module-rtmp
Summary: NGINX RTMP module

Description:
NGINX-based Media Streaming Server After installation, enable this module by running: plesk sbin nginx_modules_ctl --enable rtmp

Changes:

sw-nginx-module-rtmp-1.30.6+1.2.2-8.el9.pl18.gps.x86_64 [193 KiB]	(no changelog entry)
sw-nginx-module-rtmp-1.30.6+1.2.2-7.el9.pl18.gps.x86_64 [193 KiB]	(no changelog entry)

Update: sw-nginx-module-rtmp-selinux-1.30.6+1.2.2-8.el9.pl18.gps

Thu, 29 Oct 2026 20:56:52 +0000

Package: sw-nginx-module-rtmp-selinux
Summary: SELinux policy module required to run sw-nginx-module-rtmp

Description:
This package contains SELinux policy module necessary to run sw-nginx-module-rtmp.

Changes:

sw-nginx-module-rtmp-selinux-1.30.6+1.2.2-8.el9.pl18.gps.x86_64 [10 KiB]	(no changelog entry)
sw-nginx-module-rtmp-selinux-1.30.6+1.2.2-7.el9.pl18.gps.x86_64 [10 KiB]	(no changelog entry)

Update: sw-nginx-module-nftset-access-1.30.6+3.0.0-5.el9.pl18.gps

Thu, 29 Oct 2026 20:56:29 +0000

Package: sw-nginx-module-nftset-access
Summary: Zero-latency IP blocking using Linux kernel nftables sets

Description:
High-performance NGINX module for IP-based access control using Linux kernel nftables sets. Key Features: - Blacklist/Whitelist modes: Block or allow IPs based on nftables set membership - Multiple sets: Check against multiple nft sets in one directive - Live updates: Modify nft sets without reloading NGINX - Honeypot auto-add: Automatically add malicious IPs to nftables sets with configurable timeouts - Built-in rate limiting: Per-IP rate limiting with auto-ban to nftables sets - JavaScript challenges: Proof-of-work challenges to filter bots - Dual-stack support: Works with both IPv4 and IPv6 nftables sets - Custom status codes: Return any HTTP status when blocking - CIDR support: Use interval sets for network ranges - Prometheus metrics: Native /metrics endpoint for monitoring - JSON stats API: Detailed statistics endpoint - LRU cache: Shared memory cache for high-performance lookups Successor to ipset-access module, using modern nftables instead of legacy ipset. Compatible with realip module for proper client IP detection behind proxies. Note: This module requires CAP_NET_ADMIN capability. The selinux subpackage includes a systemd override and helper library to enable this automatically. After installation, enable this module by running: plesk sbin nginx_modules_ctl --enable nftset-access

Changes:

sw-nginx-module-nftset-access-1.30.6+3.0.0-5.el9.pl18.gps.x86_64 [39 KiB]	(no changelog entry)
sw-nginx-module-nftset-access-1.30.6+3.0.0-4.el9.pl18.gps.x86_64 [39 KiB]	(no changelog entry)

Update: sw-nginx-module-nftset-access-selinux-1.30.6+3.0.0-5.el9.pl18.gps

Thu, 29 Oct 2026 20:56:29 +0000

Package: sw-nginx-module-nftset-access-selinux
Summary: SELinux policy module required to run sw-nginx-module-nftset-access

Description:
This package contains SELinux policy module necessary to run sw-nginx-module-nftset-access. Additionally, it includes a capability helper that allows NGINX workers to retain CAP_NET_ADMIN after dropping privileges, and a systemd drop-in to automatically configure the required capabilities for the nginx service.

Changes:

sw-nginx-module-nftset-access-selinux-1.30.6+3.0.0-5.el9.pl18.gps.x86_64 [15 KiB]	(no changelog entry)
sw-nginx-module-nftset-access-selinux-1.30.6+3.0.0-4.el9.pl18.gps.x86_64 [16 KiB]	(no changelog entry)

Update: sw-nginx-module-live-common-1.30.6+2.3.1-4.el9.pl18.gps

Thu, 29 Oct 2026 20:56:02 +0000

Package: sw-nginx-module-live-common
Summary: Kaltura Media Framework Common NGINX Module

Description:
Shared module for exposing an HTTP API, sending HTTP events, parsing JSON, KMP/KSMP definitions, etc., used by most Kaltura Media Framework NGINX modules. After installation, enable this module by running: plesk sbin nginx_modules_ctl --enable live-common

Changes:

sw-nginx-module-live-common-1.30.6+2.3.1-4.el9.pl18.gps.x86_64 [69 KiB]	(no changelog entry)
sw-nginx-module-live-common-1.30.6+2.3.0-4.el9.pl18.gps.x86_64 [69 KiB]	(no changelog entry)
sw-nginx-module-live-common-1.30.6+2.2.1-4.el9.pl18.gps.x86_64 [69 KiB]	(no changelog entry)

Update: sw-nginx-module-ipset-access-1.30.6+2.0.10-5.el9.pl18.gps

Thu, 29 Oct 2026 20:55:37 +0000

Package: sw-nginx-module-ipset-access
Summary: Zero-latency IP blocking using Linux kernel ipsets (v2)

Description:
High-performance NGINX module for IP-based access control using Linux kernel ipsets. Key Features: - Blacklist/Whitelist modes: Block or allow IPs based on ipset membership - Honeypot auto-add: Automatically add malicious IPs to ipsets with configurable timeouts and custom HTTP status codes - Built-in rate limiting: Per-IP rate limiting with auto-ban to ipsets - JavaScript challenges: Proof-of-work challenges to filter bots - Dual-stack support: Works with both IPv4 and IPv6 ipsets - FirewallD compatible: Integrates with firewall-cmd managed ipsets - Whitelist bypass: Whitelisted IPs skip rate limiting and challenges - Dry-run mode: Test rules in production without blocking - Prometheus metrics: Native /metrics endpoint for monitoring - LRU cache: Shared memory cache for high-performance lookups Uses libipset directly (no CLI fallback) for kernel-level performance. Compatible with realip module for proper client IP detection behind proxies. Note: This module requires CAP_NET_ADMIN capability. The selinux subpackage includes a systemd override and helper library to enable this automatically. After installation, enable this module by running: plesk sbin nginx_modules_ctl --enable ipset-access

Changes:

sw-nginx-module-ipset-access-1.30.6+2.0.10-5.el9.pl18.gps.x86_64 [38 KiB]	(no changelog entry)
sw-nginx-module-ipset-access-1.30.6+2.0.10-4.el9.pl18.gps.x86_64 [38 KiB]	(no changelog entry)

Update: sw-nginx-module-ipset-access-selinux-1.30.6+2.0.10-5.el9.pl18.gps

Thu, 29 Oct 2026 20:55:37 +0000

Package: sw-nginx-module-ipset-access-selinux
Summary: SELinux policy module required to run sw-nginx-module-ipset-access

Description:
This package contains SELinux policy module necessary to run sw-nginx-module-ipset-access. Additionally, it includes a capability helper that allows NGINX workers to retain CAP_NET_ADMIN after dropping privileges, and a systemd drop-in to automatically configure the required capabilities for the nginx service.

Changes:

sw-nginx-module-ipset-access-selinux-1.30.6+2.0.10-5.el9.pl18.gps.x86_64 [15 KiB]	(no changelog entry)
sw-nginx-module-ipset-access-selinux-1.30.6+2.0.10-4.el9.pl18.gps.x86_64 [16 KiB]	(no changelog entry)

Update: sw-nginx-module-gps-license-1.30.6+1.11.0-4.el9.pl18.gps

Thu, 29 Oct 2026 20:55:09 +0000

Package: sw-nginx-module-gps-license
Summary: GetPageSpeed license and update-telemetry module

Description:
Keystone module of the GetPageSpeed NGINX module collection for Plesk. Verifies the GetPageSpeed subscription license, reports anonymized update telemetry, and applies the free-use footer policy on servers without an active subscription. Installed and enabled automatically as a dependency of every sw-nginx-module-* package. After installation, enable this module by running: plesk sbin nginx_modules_ctl --enable gps-license

Changes:

sw-nginx-module-gps-license-1.30.6+1.11.0-4.el9.pl18.gps.x86_64 [58 KiB]	(no changelog entry)
sw-nginx-module-gps-license-1.30.6+1.10.0-4.el9.pl18.gps.x86_64 [58 KiB]	(no changelog entry)
sw-nginx-module-gps-license-1.30.5+1.10.0-4.el9.pl18.gps.x86_64 [58 KiB]	(no changelog entry)

Update: sw-nginx-module-length-hiding-1.30.6+1.1.1-5.el9.pl18.gps

Wed, 28 Oct 2026 20:47:45 +0000

Package: sw-nginx-module-length-hiding
Summary: NGINX Length Hiding Filter Module

Description:
NGINX length hiding filter module provides functionality to append randomly generated HTML comment to the end of response body to hide correct response length and make it difficult for attackers to guess secure token After installation, enable this module by running: plesk sbin nginx_modules_ctl --enable length-hiding

Changes:

sw-nginx-module-length-hiding-1.30.6+1.1.1-5.el9.pl18.gps.x86_64 [20 KiB]	(no changelog entry)
sw-nginx-module-length-hiding-1.30.6+1.1.1-4.el9.pl18.gps.x86_64 [20 KiB]	(no changelog entry)

Update: sw-nginx-compat-1.30.6.1-3.el9.gps

Wed, 28 Oct 2026 09:21:20 +0000

Package: sw-nginx-compat
Summary: Compatibility for matching NGINX version with Plesk

Description:
sw-nginx-compat provides the necessary matching between NGINX package by Plesk with module packages by GetPageSpeed.

Changes:

sw-nginx-compat-1.30.6.1-3.el9.gps.x86_64 [8 KiB]	(no changelog entry)
sw-nginx-compat-1.30.6-3.el9.gps.x86_64 [8 KiB]	(no changelog entry)

Update: sw-nginx-module-bot-verifier-1.30.6+0.0.18-4.el9.pl18.gps

Tue, 27 Oct 2026 09:40:54 +0000

Package: sw-nginx-module-bot-verifier
Summary: A search index bot verification module for NGINX

Description:
[BETA] This module has been tested on a handful of production websites. This is an NGINX module designed to validate actors claiming to be search engine indexers. It is right to disable security mechanisms for valid search engine bots to ensure your controls do not interfere with page rankings on any of the search providers. The issue is that the User Agent header cannot be trusted. In order to ensure you are allowing only valid search engine indexers, you must validate according to their published standards. This module performs that validation and caches the results to ensure you do not pay validation penalties on every request. After installation, enable this module by running: plesk sbin nginx_modules_ctl --enable bot-verifier

Changes:

sw-nginx-module-bot-verifier-1.30.6+0.0.18-4.el9.pl18.gps.x86_64 [42 KiB]	(no changelog entry)
sw-nginx-module-bot-verifier-1.30.6+0.0.17-4.el9.pl18.gps.x86_64 [32 KiB]	(no changelog entry)

Update: sw-nginx-module-zstd-1.30.6+0.2.2-4.el9.pl18.gps

Mon, 26 Oct 2026 09:19:48 +0000

Package: sw-nginx-module-zstd
Summary: NGINX module for the Zstandard compression

Description:
NGINX module for the Zstandard compression. Compresses responses on the fly with zstd, and serves precompressed .zst files where they exist. Maintained by GetPageSpeed, with a test suite and static-analysis CI. After installation, enable this module by running: plesk sbin nginx_modules_ctl --enable zstd

Changes:

sw-nginx-module-zstd-1.30.6+0.2.2-4.el9.pl18.gps.x86_64 [33 KiB]

(no changelog entry)

Update: sw-nginx-module-zip-1.30.6+1.3.0-4.el9.pl18.gps

Mon, 26 Oct 2026 09:19:31 +0000

Package: sw-nginx-module-zip
Summary: Streaming ZIP archiver for NGINX

Description:
NGINZ zip module assembles ZIP archives dynamically. It can stream component files from upstream servers with nginx's native proxying code, so that the process never takes up more than a few KB of RAM at a time, even while assembling archives that are (potentially) gigabytes in size. mod_zip supports a number of "modern" ZIP features, including large files, UTC timestamps, and UTF-8 filenames. It allows clients to resume large downloads using the "Range" and "If-Range" headers, although these feature require the server to know the file checksums (CRC-32's) in advance. See "Usage" for details. To unzip files on the fly, check out nginx-module-unzip. After installation, enable this module by running: plesk sbin nginx_modules_ctl --enable zip

Changes:

sw-nginx-module-zip-1.30.6+1.3.0-4.el9.pl18.gps.x86_64 [33 KiB]

(no changelog entry)

Update: sw-nginx-module-xss-1.30.6+0.6-4.el9.pl18.gps

Mon, 26 Oct 2026 09:19:16 +0000

Package: sw-nginx-module-xss
Summary: Native cross-site scripting support in NGINX

Description:
This module adds cross-site AJAX support to NGINX. Currently only cross-site GET is supported. But cross-site POST will be added in the future. The cross-site GET is currently implemented as JSONP (or "JSON with padding"). See http://en.wikipedia.org/wiki/JSON#JSONP for more details. After installation, enable this module by running: plesk sbin nginx_modules_ctl --enable xss

Changes:

sw-nginx-module-xss-1.30.6+0.6-4.el9.pl18.gps.x86_64 [21 KiB]

(no changelog entry)

Update: sw-nginx-module-xslt-1.30.6-5.el9.pl18.gps

Mon, 26 Oct 2026 09:19:00 +0000

Package: sw-nginx-module-xslt
Summary: NGINX XSLT dynamic module

Description:
NGINX XSLT dynamic module. This filter module transforms XML responses using one or more XSLT stylesheets. After installation, enable this module by running: plesk sbin nginx_modules_ctl --enable xslt

Changes:

sw-nginx-module-xslt-1.30.6-5.el9.pl18.gps.x86_64 [23 KiB]

(no changelog entry)

Update: sw-nginx-module-webp-1.30.6+0.1.1.5-5.el9.pl18.gps

Mon, 26 Oct 2026 09:18:46 +0000

Package: sw-nginx-module-webp
Summary: NGINX WebP module

Description:
NGINX module which converts jpg/png images on fly and sends webp response After installation, enable this module by running: plesk sbin nginx_modules_ctl --enable webp

Changes:

sw-nginx-module-webp-1.30.6+0.1.1.5-5.el9.pl18.gps.x86_64 [19 KiB]

(no changelog entry)

Update: sw-nginx-module-vts-1.30.6+0.2.7-4.el9.pl18.gps

Mon, 26 Oct 2026 09:18:08 +0000

Package: sw-nginx-module-vts
Summary: NGINX virtual host traffic status module

Description:
This is an NGINX module that provides access to virtual host status information. It contains the current status such as servers, upstreams, caches. This is similar to the live activity monitoring of NGINX Plus After installation, enable this module by running: plesk sbin nginx_modules_ctl --enable vts

Changes:

sw-nginx-module-vts-1.30.6+0.2.7-4.el9.pl18.gps.x86_64 [102 KiB]

(no changelog entry)

Update: sw-nginx-module-vod-1.30.6+1.33-6.el9.pl18.gps

Mon, 26 Oct 2026 09:17:41 +0000

Package: sw-nginx-module-vod
Summary: NGINX-based VOD Packager

Description:
On-the-fly repackaging of MP4 files to DASH, HDS, HLS, MSS. After installation, enable this module by running: plesk sbin nginx_modules_ctl --enable vod

Changes:

sw-nginx-module-vod-1.30.6+1.33-6.el9.pl18.gps.x86_64 [368 KiB]

(no changelog entry)

Update: sw-nginx-module-var-1.30.6+0.1.3-4.el9.pl18.gps

Mon, 26 Oct 2026 09:17:18 +0000

Package: sw-nginx-module-var
Summary: Dynamic variable assignment through predefined functions

Description:
The var module dynamically assigns new variables through predefined functions for NGINX. It provides operators like get_arg and get_upstream_cookie to retrieve argument and upstream set-cookie values. This is useful for complex configuration scenarios where you need to compute or extract variable values. After installation, enable this module by running: plesk sbin nginx_modules_ctl --enable var

Changes:

sw-nginx-module-var-1.30.6+0.1.3-4.el9.pl18.gps.x86_64 [42 KiB]

(no changelog entry)

Update: sw-nginx-module-upsync-1.30.6+2.1.4-4.el9.pl18.gps

Mon, 26 Oct 2026 09:16:58 +0000

Package: sw-nginx-module-upsync
Summary: NGINX module for syncing upstreams from consul or etcd

Description:
Syncs upstreams from consul or others, dynamically modify backend-servers attribute(weight, max_fails,...), needn't reload nginx. It may not always be convenient to modify configuration files and restart NGINX. For example, if you are experiencing large amounts of traffic and high load, restarting NGINX and reloading the configuration at that point further increases load on the system and can temporarily degrade performance. The module can be more smoothly expansion and constriction, and will not influence the performance. Another module, nginx-module-stream-upsync supports nginx stream module(TCP protocol), please be noticed. After installation, enable this module by running: plesk sbin nginx_modules_ctl --enable upsync

Changes:

sw-nginx-module-upsync-1.30.6+2.1.4-4.el9.pl18.gps.x86_64 [66 KiB]	(no changelog entry)
sw-nginx-module-upsync-1.30.5+2.1.4-4.el9.pl18.gps.x86_64 [66 KiB]	(no changelog entry)

Update: sw-nginx-module-upstream-jdomain-1.30.6+1.5.2-4.el9.pl18.gps

Mon, 26 Oct 2026 09:16:40 +0000

Package: sw-nginx-module-upstream-jdomain
Summary: Asynchronous domain name resolution module for NGINX upstream

Description:
Asynchronous domain name resolution module for NGINX upstream After installation, enable this module by running: plesk sbin nginx_modules_ctl --enable upstream-jdomain

Changes:

sw-nginx-module-upstream-jdomain-1.30.6+1.5.2-4.el9.pl18.gps.x86_64 [25 KiB]

(no changelog entry)

Update: sw-nginx-module-upstream-fair-1.30.6+0.1.3-4.el9.pl18.gps

Mon, 26 Oct 2026 09:16:21 +0000

Package: sw-nginx-module-upstream-fair
Summary: The fair load balancer module for NGINX

Description:
The fair load balancer module for NGINX After installation, enable this module by running: plesk sbin nginx_modules_ctl --enable upstream-fair

Changes:

sw-nginx-module-upstream-fair-1.30.6+0.1.3-4.el9.pl18.gps.x86_64 [23 KiB]

(no changelog entry)

Update: sw-nginx-module-upload-1.30.6+2.4.0-4.el9.pl18.gps

Mon, 26 Oct 2026 09:16:03 +0000

Package: sw-nginx-module-upload
Summary: NGINX module for handling file uploads

Description:
A GetPageSpeed-maintained module for NGINX for handling file uploads using multipart/form-data encoding (RFC 1867) and resumable uploads. After installation, enable this module by running: plesk sbin nginx_modules_ctl --enable upload

Changes:

sw-nginx-module-upload-1.30.6+2.4.0-4.el9.pl18.gps.x86_64 [43 KiB]

(no changelog entry)

Update: sw-nginx-module-upload-progress-1.30.6+0.9.4-5.el9.pl18.gps

Mon, 26 Oct 2026 09:15:44 +0000

Package: sw-nginx-module-upload-progress
Summary: NGINX upload progress tracking module

Description:
A module for NGINX implementing an upload progress system that monitors RFC1867 POST uploads as they are transmitted to upstream servers. This module reports upload progress to the client via a JSON response, allowing web applications to display progress bars during file uploads. After installation, enable this module by running: plesk sbin nginx_modules_ctl --enable upload-progress

Changes:

sw-nginx-module-upload-progress-1.30.6+0.9.4-5.el9.pl18.gps.x86_64 [33 KiB]

(no changelog entry)

Update: sw-nginx-module-unzstd-1.30.6+0.2.0-3.el9.pl18.gps

Mon, 26 Oct 2026 09:15:23 +0000

Package: sw-nginx-module-unzstd
Summary: Decompresses Zstd-encoded responses for clients that do not support it

Description:
The ngx_unzstd module is a filter that decompresses responses with Content-Encoding: zstd for clients that do not support Zstd encoding method. It allows to save I/O by unconditional Zstd compression of responses. This complements the zstd compression module for full zstd support. After installation, enable this module by running: plesk sbin nginx_modules_ctl --enable unzstd

Changes:

sw-nginx-module-unzstd-1.30.6+0.2.0-3.el9.pl18.gps.x86_64 [23 KiB]

(no changelog entry)

Update: sw-nginx-module-untar-1.30.6+1.1-4.el9.pl18.gps

Mon, 26 Oct 2026 09:15:05 +0000

Package: sw-nginx-module-untar
Summary: NGINX HTTP Untar Module

Description:
This NGINX module can serve static file content directly from tar archives. Inspired by nginx-unzip-module. Features: * Zero-copy: outputs content directly from archive file (no temporary files) * Caching parsed archive file entries: reduce archive scan-search time * Supported tar item types: normal file, long file name data Configuration example: location ~ ^/(.+?\.tar)/(.*)$ { untar_archive "$document_root/$1"; untar_file "$2"; untar; } After installation, enable this module by running: plesk sbin nginx_modules_ctl --enable untar

Changes:

sw-nginx-module-untar-1.30.6+1.1-4.el9.pl18.gps.x86_64 [20 KiB]

(no changelog entry)

Update: sw-nginx-module-tuning-1.30.6+1.3.0-4.el9.pl18.gps

Mon, 26 Oct 2026 09:14:29 +0000

Package: sw-nginx-module-tuning
Summary: NGINX tuning advisor module

Description:
Observes real traffic patterns and provides data-driven tuning recommendations for buffer sizes and timeouts. Collects upstream header/body sizes, response times, and connection reuse metrics using lock-free atomic counters. Exposes JSON API with percentile approximations and ready-to-use NGINX config snippets. After installation, enable this module by running: plesk sbin nginx_modules_ctl --enable tuning

Changes:

sw-nginx-module-tuning-1.30.6+1.3.0-4.el9.pl18.gps.x86_64 [25 KiB]

(no changelog entry)

Update: sw-nginx-module-ts-1.30.6+0.1.1-4.el9.pl18.gps

Mon, 26 Oct 2026 09:14:11 +0000

Package: sw-nginx-module-ts
Summary: NGINX MPEG-TS Live Module

Description:
NGINX MPEG-TS Live Module: * receives MPEG-TS over HTTP * produces and manages live HLS * produces and manages live MPEG-DASH After installation, enable this module by running: plesk sbin nginx_modules_ctl --enable ts

Changes:

sw-nginx-module-ts-1.30.6+0.1.1-4.el9.pl18.gps.x86_64 [50 KiB]

(no changelog entry)

Update: sw-nginx-module-trim-1.30.6+0.1.0-4.el9.pl18.gps

Mon, 26 Oct 2026 09:13:53 +0000

Package: sw-nginx-module-trim
Summary: Filter that strips whitespace and comments from HTML responses

Description:
NGINX filter module that modifies responses by removing unnecessary whitespace and comments from HTML, including inline JavaScript and CSS. After installation, enable this module by running: plesk sbin nginx_modules_ctl --enable trim

Changes:

sw-nginx-module-trim-1.30.6+0.1.0-4.el9.pl18.gps.x86_64 [24 KiB]

(no changelog entry)